SOM-2079-001_w.pdf - 第126页

123 SOM-2079 異常 ID 異常名、説明、要因および復帰方法 4b2084 PCB Height Measurement The coordinate where the height measurement was impossible was appointed. Please appoint a coordinate in a measurable range. 4b2101 SSC network abnormal T…

122

SOM-2079

異常 ID 異常名、説明、要因および復帰方法

4b2004 PCB Height Measurement

The abnormality number of times of measured value was beyond a set point.

-----

4b2005 PCB Height Measurement

A measurement result is abnormal(measure in arbitrary position)

Check the measurement position.

4b2006 PCB Height Measurement

Surpass a measurement range. (+ direction)

-----

4b2007 PCB Height Measurement

Surpass a measurement range. (- direction)

-----

4b2008 PCB Height Measurement

Detected a curve more than permission values. (+ direction)

-----

4b2009 PCB Height Measurement

Detected a curve more than permission values. (- direction)

-----

4b200a PCB Height Measurement

Error of the result measured by a master jig (height)

Check if the master jig (height) has some dirt and foreign particles.

4b200b PCB Height Measurement

Failed in wearing height revision.

-----

4b200c PCB Height Measurement

An abnormal measurement was detected by the multipoint measurement.

Check the measurement position.

4b200d PCB Height Measurement

Recovery by the multipoint measurement failed because the measurement result

was insufﬁcient.

Check the measurement position.

4b2011 PCB Height Measurement

Measurement time-out

-----

4b2081 PCB Height Measurement

Abnormality occurred for communication with a sensor

-----

4b2082 PCB Height Measurement

Failed in wearing height revision.

-----

4b2083 PCB Height Measurement

Measurement time-out

-----

1005-001

6.11 その他

123

SOM-2079

異常 ID 異常名、説明、要因および復帰方法

4b2084 PCB Height Measurement

The coordinate where the height measurement was impossible was appointed.

Please appoint a coordinate in a measurable range.

4b2101 SSC network abnormal

There is abnormal in SSC network.

Please conﬁ

rm the cable of SSC network.

4b2102 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U82 channel 1and ampliﬁer.

(1)

Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2103 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U82 channel 2and ampliﬁer.

(1)

Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2104 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U83 channel 1and ampliﬁer.

(1)

Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2105 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U83 channel 2 and ampliﬁer.

(1)

Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2106 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U84 channel 1 and ampliﬁer.

(1)

Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

1005-001

6.11 その他

124

SOM-2079

異常 ID 異常名、説明、要因および復帰方法

4b2107 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U84 channel 2 and ampliﬁer.

(1)

Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2108 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U90 channel 1 and ampliﬁer.

(1)

Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2109 SSC network abnormal

There is a problem with the connection between the position board MR-

MC10-U90 channel 2 and ampliﬁer.

(1)

Shut down the machine and check the connection between the position board

and ampliﬁer.

(2) Check whether or not the multi-axis ampliﬁer is damaged.

(3) Check whether or not the servo ampliﬁers are damaged.

4b2201 Illegal Operation

There is no Pattern program ﬁle.

-----

4b2301 Feeder (Servo Error)

Alarm Code:A0 - Internal Parameter Error (Breakdown of Control PCB)

Please replace the feeder. (Do not disconnect the feeder in powering on,

otherwise it may cause the inside data broken.)

4b2302 Feeder (Servo Error)

arm Code:A1 - Over Current Error (Foreign substances in the tape feeding drive

section)

Conﬁrm whether or not the tape is being jammed on the path./ Conﬁrm the reel to

operate smoothly./ Conﬁrm whether or not some components and dust are being

caught in the sprocket./ Conﬁrm whether or not some components and dust are

being caught in the

4b2303 Feeder (Servo Error)

Alarm Code:A2 - Others

-----

4b2304 Feeder (Servo Error)

Alarm Code:A3 - Others

-----

4b2305 Feeder (Servo Error)

arm Code:A4 - Main Circuit Power Supply Error (Please check the power supply

voltage.) (G04)

Please check the power supply voltage.

1005-001

6.11 その他