00196044-05 - sg x und x4i fse_en - 第113页
Communication and Control CAN Bus Processor Board C&P Head CAN Bus S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN Communication and Control 11 3 4.3.4.3 CAN Bus-Controlled Functions on the T win He…
Communication and Control
CAN Bus CAN Bus Processor Board C&P Head
Student Guide (FSE) SIPLACE X Series and X4I
Communication and Control Edition 01/2009 EN
112
4.3.4.2 CAN Bus-Controlled Functions on the CPP Head
4-22: Communication TQM module
Communication and Control
CAN Bus Processor Board C&P Head CAN Bus
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Communication and Control
113
4.3.4.3 CAN Bus-Controlled Functions on the Twin Head
4-23: Function on the Can Bus Processor Twin head
The CAN bus processor board is no longer installed on each Twin segment, as in the case of the HF
machines. It can now be found at a central location on the head processor board C500.
NOTE:
The status of the 16 bit processor board is indicated on the 7-segment display.
Normal status on the display is: "." flashes. (for description see Section C&P Head).
Communication and Control
CAN Bus CAN Bus Communication with Axis Controller
Student Guide (FSE) SIPLACE X Series and X4I
Communication and Control Edition 01/2009 EN
114
4.3.5 CAN Bus Communication with Axis Controller
The communication between the axis controller modules is now achieved using the CAN Bus. All the
information exchanged between these modules is transmitted via the CAN bus (e.g. axis parameter,
target position, end position signal, ...).
4-24: Overview axis controller