00196044-05 - sg x und x4i fse_en - 第29页
Operational Safety Warning Label W205 on the Tape Cutter Warning Labels S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN Operational Safety 29 2.2.3.2 W arning Label W205 on the Underside of the Comp one…
Operational Safety
Warning Labels Warning Label W205 on the Tape Cutter
Student Guide (FSE) SIPLACE X Series and X4I
Operational Safety Edition 01/2009 EN
28
2.2.3.1 Warning Label W205 on the Top
2-4: Warning label W205 on the top of the tape cutter
WARNING:
If you wish to do work on the tape cutter, you must disconnect the machine from the mains
supply and the compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.
DANGER:
Wear robust protective gloves when working on the tape cutter.
Operational Safety
Warning Label W205 on the Tape Cutter Warning Labels
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Operational Safety
29
2.2.3.2 Warning Label W205 on the Underside of the Component Trolley Docking Unit (HF-Series)
2-5: Warning label W205 on the bottom of the tape cutter
Operational Safety
Warning Labels Warning Label W205 on the Tape Cutter
Student Guide (FSE) SIPLACE X Series and X4I
Operational Safety Edition 01/2009 EN
30
2.2.3.3 Warning Label W205 on the Waste Slide (X-Series)
2-6: Warning label W205 on the waste slide
NOTE:
The position of the waste slide is shown in Section (2.2.3.4 Warning label W205 on the cross
bar below the tape cutter
J
31 ) .