00196044-05 - sg x und x4i fse_en - 第37页
Operational Safety Warning label W209 on the emergency stop buttons Warning Labels S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN Operational Safety 37 2.2.9 W arning label W209 on the emergency stop b…
Operational Safety
Warning Labels Warning label W208 "laser class 2" on the PCB conveyor
Student Guide (FSE) SIPLACE X Series and X4I
Operational Safety Edition 01/2009 EN
36
2.2.8 Warning label W208 "laser class 2" on the PCB conveyor
2-13: Warning label W208 "laser class 2" on the PCB conveyor
W208, article no. 03009347-01
LASER RADIATION!
Do not look into beam
Laser class 2
Item no. 03009347-01 (quantity per machine: 4 for the dual conveyor , 2 for
the single conveyor)
Operational Safety
Warning label W209 on the emergency stop buttons Warning Labels
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Operational Safety
37
2.2.9 Warning label W209 on the emergency stop buttons
2-14: Warning label W209 on the emergency stop buttons
W209, article no. 03009349-01
For Australia, Canada, Mexico and USA, warning label W209 is
affixed to the extension kit instead of the yellow ring on the
emergency stop buttons.
Item no. 03009349-01 (quantity per machine: 2)
Operational Safety
Warning Labels Warning Label W211 on the CEKON Plug
Student Guide (FSE) SIPLACE X Series and X4I
Operational Safety Edition 01/2009 EN
38
2.2.10 Warning Label W211 on the CEKON Plug
RESIDUAL VOLTAGE!
Wait 30 seconds after disconnecting the main power plug from the mains
to allow any residual voltages to dissipate.
NAFTA region: Hazardous Voltage
Residual power at plug prongs and wire ends will cause death or serious
injury. Avoid contact with power plug and/or wire ends for 30 seconds
(quantity per machine: 1)
Item no. 03009351-01