00196044-05 - sg x und x4i fse_en - 第510页
Calibration Additional Functions Configuring the Nozzle Changer S tudent Guide (FSE) SI PL ACE X Series and X4I Calibration Edition 01/2009 EN 514 Magazine configuration for CPP head Magazines for 28xx n ozzles Magaz…
Calibration
Configuring the Nozzle Changer Additional Functions
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Calibration
513
Start the local ACT program
Placement.
Start the prescribed ACT program, now locally available at the station computer.
The results of the ACT measurement will be automatically shown as a graphic. (Detail measurements
will be stored in a text file.)
Save the results in a PDF file or apply the measured offsets to individual heads in the kinematic machine
model.
12.6.9 Configuring the Nozzle Changer
NOTE:
Measurement of the placed board can be repeated if necessary.
Results display
The individual measurements will be shown on a
graphic as points for X, Y and angle. The statistical
results will be shown in a tree structure, next to the
diagram.
The integration of the Twin Head and the CPP
head requires various new settings: magazine
carrier configuration, magazine configuration and
nozzle configuration.
Calibration
Additional Functions Configuring the Nozzle Changer
Student Guide (FSE) SIPLACE X Series and X4I
Calibration Edition 01/2009 EN
514
Magazine configuration for CPP head
Magazines for 28xx nozzles
Magazines for 20xx nozzles
Magazine configuration for Twin Head
Magazine for a special nozzle
Magazine for two standard nozzles
Nozzle configuration
Example of CPP head
Calibration
Configuring the Nozzle Changer Room for Your Sketches and Notes
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Calibration
515
12.7 Room for Your Sketches and Notes