00196044-05 - sg x und x4i fse_en - 第513页

Head Modularity Important Information S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN Head Modularity 517 13 Head Modularity See also: J 12.6.5 Fast Head Exchange [ J  506] 13.1 Import ant Information …

100%1 / 632
Calibration
Room for Your Sketches and Notes Configuring the Nozzle Changer
Student Guide (FSE) SIPLACE X Series and X4I
Calibration Edition 01/2009 EN
516
Head Modularity
Important Information
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN Head Modularity
517
13 Head Modularity
See also:
J
12.6.5 Fast Head Exchange [
J
506]
13.1 Important Information
ATTENTION: Head exchange
When replacing the Twin Head with a CPP head with MTC2 in this placement area, you need
to fit a bumper extension, to limit the Y travel range. After switching the machine back on, you
then need to redetermine the machine zero point and the travel ranges.
When you use a Twin Head again, you need to remove the bumper extension.
ATTENTION: Risk of head crash!
When installing a CPP head with a stationary camera, this needs to be fitted in the top position,
otherwise there is a risk of a head crash!
Head Modularity
SIPLACE X and X4I Configuration Options
Student Guide (FSE) SIPLACE X Series and X4I
Head Modularity Edition 01/2009 EN
518
13.2 SIPLACE X and X4I Configuration Options
Legend
Placement heads
– TH = Twin head
– CPP_L = Collect&Pick&Place head in low
assembly position
– CPP_H = Collect&Pick&Place head in
high assembly position
– C&P20A = Collect&Place head with 20
segments
– Bold = Standard head configuration
1/2/3/4 = Gantry 1/2/3/4
1)
: The TH/TH combination in one PA was
introduced with SW 603 and may only be used
with the stationary cameras with VLT33. This
also applies to CPP / CPP or CPP / TH
combinations. Retrofitting kits have been
defined to upgrade machines already in
operation.