00196044-05 - sg x und x4i fse_en - 第544页
MTC2 Overview Oper ational Safety S tudent Guide (FSE) SI PL ACE X Series and X4I MTC2 Edition 01/2009 EN 548 14-7: Warning labels on the enc losures around the electric parts 14-8: Warning label by the lifting axis moto…
MTC2
Operational Safety Overview
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN MTC2
547
Warning Labels
14-6: Information label below the main switch
14-5: Location of the warning labels on the MTC2 (left-hand side)
Legend
1. Information label below the main switch
2. Warning labels on the enclosures around the
electric parts
3. Warning label by the lifting axis motors
4. Warning labels by the toothed belts of the
lifting axis and feed axis
5. Warning labels in the feeding area and the
lifting frame area
6. Warning labels in the refill area (behind the
protective doors)
7. Information label at the ground terminal
8. Warning labels on the motor controller covers
(below the enclosure)
9. No loads warning by the feed axis
10. Information labels above the guides for the
fork lift truck
11. Information label for the cranking device
MTC2
Overview Operational Safety
Student Guide (FSE) SIPLACE X Series and X4I
MTC2 Edition 01/2009 EN
548
14-7: Warning labels on the enclosures around the electric parts
14-8: Warning label by the lifting axis motors
14-9: Warning labels by the toothed belts of the lifting axis and feed axis
14-10: Warning labels in the feeding area and the lifting frame area
MTC2
Operational Safety Overview
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN MTC2
549
14-11: Warning labels in the refill area (behind the protective doors)
14-12: Information label at the ground terminal
14-13: Warning labels on the motor controller covers (below the enclosure)
14-14: No loads warning by the feed axis