00196044-05 - sg x und x4i fse_en - 第557页
MTC2 Modules of the controller Construction and mode of operation S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN MTC2 561 14-26: Electronics board and mounting plate 2 Legend 1 Combination circuit brea…
MTC2
Construction and mode of operation Modules of the controller
Student Guide (FSE) SIPLACE X Series and X4I
MTC2 Edition 01/2009 EN
560
Terminal strips:
– X01 feed-in
– X02 24 V voltage supply for sensors/actuators
– X03 emergency stop circuit
– X04 sensors/actuators tower 1
– X05 sensors/actuators tower 2
– X06 sensors/actuators
14.2.5.5 Mounting plate
A mounting plate with the following components:
Combination circuit breakers: K03 - K05
Braking resistor: R01
Braking resistor: R02
Power supply, 24 V DC: T01
Line filter: Z01
Discharge reactor (Is this part missing in your MTC please order the retrofitting kit 03016518-01, that
for your own safety.)
14-25: Electronics board and mounting plate 1
Legend
1. Main switch
2. EMERGENCY STOP button
3. Automatic circuit breakers
4. Motor Circuit Breaker
5. Contactors
6. Grounding terminals
7. Through terminals
8. Initiator LED terminals
9. Actuator LED terminals
10. Optocouplers
MTC2
Modules of the controller Construction and mode of operation
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN MTC2
561
14-26: Electronics board and mounting plate 2
Legend
1 Combination circuit breakers
2 Braking resistors
3 Power supply
4 Line filters
5 Discharge reactor
MTC2
Construction and mode of operation Modules of the controller
Student Guide (FSE) SIPLACE X Series and X4I
MTC2 Edition 01/2009 EN
562
14.2.5.6 Block diagrams
Power supply block diagram
14-27: Power supply block diagram