00196044-05 - sg x und x4i fse_en - 第566页
MTC2 Construction and mode of operation MTC2 - Individual Functions S tudent Guide (FSE) SI PL ACE X Series and X4I MTC2 Edition 01/2009 EN 570 14.2.9 MTC2 - Individual Functions The button Mechanical functions... in the…
MTC2
Placement Functions Construction and mode of operation
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN MTC2
569
Button
Maximum component level
Confirms that the waffle pack tray in the selected level is full.
The component level displayed in the table is updated.
Field
Complete cassette:
Button
Out of operation
All waffle pack trays in the selected cassette are put out of operation, which means that components
can not be picked up from them. A message is displayed, and the component level for this level is
displayed in red in the table.
Button
Maximum component level
Confirms that the waffle pack trays in all levels of the selected cassette are full.
The component level displayed in the table is updated.
14-33: Dialog box Enter component level
entry field
New level
X Enter the value for the actual number of refilled
components.
Confirm your entry with
OK
The component level displayed in the table is
updated.
MTC2
Construction and mode of operation MTC2 - Individual Functions
Student Guide (FSE) SIPLACE X Series and X4I
MTC2 Edition 01/2009 EN
570
14.2.9 MTC2 - Individual Functions
The button
Mechanical functions...
in the view
Matrix-tray changer
(see Section (14.2.8.3 "Matrix-tray
changer" view (Example: location 2)
J
567 ) ) can be used to call up the individual MTC2 functions.
Functions in this view
Matrix-tray changer single functions
Button
Transport position
This function moves the MTC2 into a defined position for transport.
Field
Reference Run
:
– Button
Entire MTC2
A reference run is carried out with the entire MTC2.
– Button
Tower 1
A reference run is carried out with tower 1.
– Button
Tower 2
A reference run is carried out with tower 2.
Field
Prepare level
:
– entry field
Level:
Entry field for the level containing the waffle pack tray to be made available.
– Button
Tower 1
The waffle pack tray of the level entered is moved out of tower 1.
– Button
Tower 2
The waffle pack tray of the level entered is moved out of tower 2.
14-34: Settings box Matrix-tray changer single functions
"Matrix Tray Changer individual functions
view
ATTENTION:
Make sure that the MTC2 is not in the refill position when this function is executed.
MTC2
Calibration sequence in general MTC2 Calibration and Settings
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN MTC2
571
14.3 MTC2 Calibration and Settings
14.3.1 Calibration sequence in general
14-35: General Calibration sequence