00196044-05 - sg x und x4i fse_en - 第611页
MTC2 Downloadi ng Parameter Sets Masterdrives S tudent Guide (FSE) SIPL ACE X Series and X4I Edition 01/2009 EN MTC2 615 14.4.5.4 Uploading the Parameter Set s (Backup of Parameter Set s) X Select FILE --> UPLOAD --&g…
MTC2
Masterdrives Downloading Parameter Sets
Student Guide (FSE) SIPLACE X Series and X4I
MTC2 Edition 01/2009 EN
614
X Select the
Drive
and the operating software for the drive.
X Select
OK
X Select
Online EEPROM
(see diagram above).
If the settings for the serial interfaces at the master drive and notebook are the same, you will now be
connected online to the drive.
To check the serial interface in the Drive Monitor software, go to
TOOLS
-->
ONLINE SETTINGS
.
ATTENTION:
Select the operating software 1.5 for the MTC 1!
X Select
Save.
ATTENTION:
All parameters which you change now will be send to the drive directly and they are immediately
active.
MTC2
Downloading Parameter Sets Masterdrives
Student Guide (FSE) SIPLACE X Series and X4I
Edition 01/2009 EN MTC2
615
14.4.5.4 Uploading the Parameter Sets (Backup of Parameter Sets)
X Select
FILE
-->
UPLOAD
-->
BASIC DEVICE COMPLETE
X Save the parameter set under a name which make sense, for example feed axis tower 1 and
additionally the serial number of the MTC2.
14-73: Upload parameter set
MTC2
Masterdrives Downloading Parameter Sets
Student Guide (FSE) SIPLACE X Series and X4I
MTC2 Edition 01/2009 EN
616
14.4.5.5 Download parameter set:
X Select
FILE
-->
Download
-->
Save EEPROM
X Switch the MTC OFF and then ON again. Start the reference run.
NOTE:
Before you start the download, the master drive should be reset to factory defaults (see 13.4.3).
ATTENTION:
The axis concerned must not be subject to position control!
NOTE: TIP
There are two ways of deactivating position control:
- Open the MTC door or
- Switch the MTC on and do not perform a reference run of the MTC.
14-74: Downloading Parameter Sets
NOTE:
Select Save on EEPROM
!
ATTENTION:
If errors are counted in field E:(Error)
when you first start the download, abort
the download immediately and try it
again.