00198150-02_SM_TX_en - 第187页
7 Conveyor 7.7 Boards Service Manual SIPLACE TX Series 06/2017 187 Fig.250: Select subsystem ► Select the subsystem for the eSW download. ► Click on the Continue button. Fig.251: Update machine menu 1. Selection button…
7 Conveyor
7.7 Boards
186 Service Manual SIPLACE TX Series 06/2017
7.7.2 eSW Download (SW 70x)
Fig.247: Select operator level
► Click the
button to enter the Settings
menu.
► Click the
button to open the Check and set
user settings menu.
► Switch to operator level Machine service or bet-
ter.
Fig.248: Service menu
► Click the
button to enter the Service menu.
► Click on the Embedded software button.
Fig.249: Embedded software menu
Select the required function:
► Click on Update machine… to check the entire
machine and to perform an eSW download for
multiple subsystems (see next picture).
► Click on Update subsystem… to select and
check one subsystem and to perform an eSW
download.
► Click on the button Version information…, to
view all versions of the subsystems, BIOS, ap-
plication 1/2/3/5.
7 Conveyor
7.7 Boards
Service Manual SIPLACE TX Series 06/2017 187
Fig.250: Select subsystem
► Select the subsystem for the eSW download.
► Click on the Continue button.
Fig.251: Update machine menu
1. Selection buttons:
BIOS
Application 1
Application 2
Application 3
2. Shows the status of the individual subsystems
3. Update information
This shows you the number of subsystems which
still need to be downloaded.
4. Starts the download
7 Conveyor
7.8 Setting the Fixed Conveyor Rail
188 Service Manual SIPLACE TX Series 06/2017
7.8 Setting the Fixed Conveyor Rail
CAUTION
Moving the conveyor side walls
► The conveyor sides are highly sensitive. Move them very carefully and evenly. Take
special care not to distort the conveyor sides.
CAUTION
Fixed (screwed) conveyor sides for "input/output extension" option
The conveyor sides are fixed with screws when the "input/ output extension" option is in-
stalled. Movement without removing the fastening screws could cause irreparable damaged
to the conveyor side walls.
► If an "input/output extension" option is installed, also see the assembly instructions "In-
put/Output Extension – SIPLACE TX-Series" [00198141-xx] (German/English).
Overview
Fig.252: Positions
1 Position 231.0 mm (outer position)
Max. board width: 433mm
2 Position 268.0 mm (outer position)
Max. board width: 450mm
3 Position 281.0 mm (outer position)
Max. board width: 460mm
4 Position for conveyor left
5 Position for conveyor right