00198150-02_SM_TX_en - 第255页

11 Cutter 11.4 Replacing the Metal Buffer/Spacer Distance Piece Service Manual SIPLACE TX Series 06/2017 255 11.4 Replacing the Metal Buffer/Spacer Distance Piece Parts, equipment and tools Fig.351: Metal buffer ● Metal…

11 Cutter

11.3 Replacing the Cutter on the COT Insert [03066690-xx]

254 Service Manual SIPLACE TX Series 06/2017

Fig.350: Pulling out the cutter

► Slide out the cutter unit on the support edge of

the machine.

CAUTION

Additional work

► For all further work, either fix the cutter to the mounting plate with four hexagon

socket-head screws M6 or use screw clamps to fasten the cutter to a sturdy table.

► Do not place the cutter onto the pneumatic connections (down on the lifting cylinders).

Installation

► Installation is performed by following the above instructions in reverse order.

11 Cutter

11.4 Replacing the Metal Buffer/Spacer Distance Piece

Service Manual SIPLACE TX Series 06/2017 255

11.4 Replacing the Metal Buffer/Spacer Distance Piece

Parts, equipment and tools

Fig.351: Metal buffer

●

Metal buffer M4.65 Shore [00329209-xx]

Fig.352: Spacer distance piece

●

Spacer distance piece [03007432-xx]

 NOTICE!

Same procedure

The removal and installation of the spacer dis-

tance piece is the same as that for the metal buf-

fer. The metal buffer is described below.

Overview

Fig.353: Metal buffer and spacer distance piece on cutter

1. Metal buffer and spacer distance piece (2 on

each side)

The metal butters absorb the cutting vibration to

the machine frame.

11 Cutter

11.4 Replacing the Metal Buffer/Spacer Distance Piece

256 Service Manual SIPLACE TX Series 06/2017

Removal

► Switch off the machine, disconnect it from the power supply and secure it to prevent

unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}15].

► Remove the cutter from the machine.

Replacing the Cutter on the COT Insert [03066690-xx] [}252]

Fig.354: Removing metal buffer

► Remove the plastic cover(1).

► Take out the screws(2).

► Remove the complete mounting strip(3).

► Remove the metal buffer.

Installation

► Follow the removal instructions in reverse order for further installation.