00194598-01.pdf - 第46页
2 Retrofit instructions: ceramic substrate centering for SIPLACE S -27 HM Ceramic substrate centering SIPLACE S -27 HM 12/2004 Edition 46 : Fit the sol enoid valv e using t wo screw s (see photograp h belo w). : Connect …

Ceramic substrate centering SIPLACE S-27 HM 2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM
12/2004 Edition
45
: Insert the piece of hose you removed once more, together with the non-return valve and
T-piece.
Shorten the hose accordingly.
2
Make sure that the non-return valve is installed in the correct position (see picture). 2
2
2
: Connect the compressed air hose to the ceramic substrate centering to the T-piece.
2
Non-return valve
T-piece
T-piece
PUN4 hose
to solenoid valve

2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM Ceramic substrate centering SIPLACE S-27 HM
12/2004 Edition
46
: Fit the solenoid valve using two screws (see photograph below).
: Connect the compressed air hose to the ceramic substrate centering to the solenoid valve.
2
2
2
2
2
2
2
2
2
T-piece
Connecting hose
PUN4 for T-piece
Solenoid valve
PUN4 compressed
air hose to ceramic
substrate centering

Ceramic substrate centering SIPLACE S-27 HM 2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM
12/2004 Edition
47
On the dual conveyor, the second solenoid valve is fitted at this point: 2
2
: Attach the electrical connections on the solenoid valve to the conversion board
at X34 (track 1 on the single conveyor and dual conveyor )
and X35 (track 2 on the dual conveyor). Run the cable through the cable duct.
2
Installation position of the solenoid valve for dual conveyor
Plug on conversion board