00194598-01.pdf - 第47页
Ceramic substrate centering SIPLACE S- 27 HM 2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM 12/2004 Edition 47 On the du al co nveyo r , the s econd so lenoi d valve is fitted at this poin t: 2 …

2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM Ceramic substrate centering SIPLACE S-27 HM
12/2004 Edition
46
: Fit the solenoid valve using two screws (see photograph below).
: Connect the compressed air hose to the ceramic substrate centering to the solenoid valve.
2
2
2
2
2
2
2
2
2
T-piece
Connecting hose
PUN4 for T-piece
Solenoid valve
PUN4 compressed
air hose to ceramic
substrate centering

Ceramic substrate centering SIPLACE S-27 HM 2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM
12/2004 Edition
47
On the dual conveyor, the second solenoid valve is fitted at this point: 2
2
: Attach the electrical connections on the solenoid valve to the conversion board
at X34 (track 1 on the single conveyor and dual conveyor )
and X35 (track 2 on the dual conveyor). Run the cable through the cable duct.
2
Installation position of the solenoid valve for dual conveyor
Plug on conversion board

2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM Ceramic substrate centering SIPLACE S-27 HM
12/2004 Edition
48
: Please check the plug configuration before plugging in.
2
: Fit the cover to the cable duct and to the conversion board.
2
If the lifting table bed that you removed already has the holes for the ceramic substrate centering,
it may be refitted. If there are no holes, then the new lifting table bed with the holes must be fitted.2
: Install the appropriate lifting table bed.
: Fix the ceramic substrate centering to the lifting table bed using the pins (photograph below).
: Screw it firmly to the lifting table bed using two screws.
2
2
2
2
Coding 1 2
Jumper brown 3 4 brown Jumper
Sensor brown 5 6
Sensor black 7 8
910
11 12
Sensor blue 13 14 black Solenoid valve
Solenoid valve black/red 15 16
Coding 17 18
Ceramic substrate centering