00194598-01.pdf - 第54页

2 Retrofit instructions: ceramic substrate centering for SIPLACE S -27 HM Ceramic substrate centering SIPLACE S -27 HM 12/2004 Edition 54 : Detach the st op (= stop un it) f ixing on the X -axis c arriage un it (2 hexa g…

100%1 / 66
Ceramic substrate centering SIPLACE S-27 HM 2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM
12/2004 Edition
53
: Detach the complete stop rail fixing on the X-axis carriage unit (2 hexagon socket head screws
M 3, see Fig. 2.7 - 2 -> 4, 5).
: Fit the necessary complete stop rail (see table above and Fig. 2.7 - 1).
Fig. 2.7 - 1 Stop (unit) set 1, 2, 3 and matching stop rail, complete 1, 2, 3
1. Stop (unit) set 1, fixed stop
2. Stop (unit) set 2, fixed stop
3. Stop (unit) set 3, fixed stop
4. Stop rail 1, 2 and 3, complete (see marking 1, 2 and 3), movable stop
5. Travel limiting parallel pin:
MUST be present on stop rail 1
NOTE:
For substrates 50 mm to 62 mm wide that are more than 50 mm long (e.g. twice as long), the stop
set 1 (fixed stop) is fitted together with the complete stop rail "2" (= movable stop) (see table above
and Fig. 2.7 - 1). 2
2
3
1
5
4
4
4
2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM Ceramic substrate centering SIPLACE S-27 HM
12/2004 Edition
54
: Detach the stop (= stop unit) fixing on the X-axis carriage unit (2 hexagon socket head screws
M3, see Fig. 2.7 - 2 -> 6, 7).
: Fit the necessary stop unit 1, 2 or 3 (see table above).
2
Fig. 2.7 - 2 Matching the ceramic substrate centering to the size of substrate
Key: 2
1. Base unit
2. X carriage unit
3. Fixing bracket for stop rail, 2 hexagon socket head screws M3 x 8
4. Stop rail (according to size of substrate: see table above)
5. 2 hexagon socket head screws M3
6. Stop unit with spacer bolt (according to size of substrate: see table above)
7. Fixing for stop unit: 2 hexagon socket head screws M3
8. Fixed stop roller
2
2
2
2
Ceramic substrate centering SIPLACE S-27 HM 2 Retrofit instructions: ceramic substrate centering for SIPLACE S-27 HM
12/2004 Edition
55
: With the movable stop, make sure that the pins engage in the groove in the carriage unit.
2
Fig. 2.7 - 3 Ceramic substrate centering (side view)
Fixed stop
Movable stop
Pins in the groove