00193853-01 - 第20页
Retrofit instructions SIPLACE S-27 HM Long Board Option 10/2004 Edition 20 : Raise the lifting table mech anism man ually , otherw ise you wi ll not be able to fit the liftin g table bed. 2 Fix this p osition with an ins…
Retrofit instructions SIPLACE S-27 HM Long Board Option
10/2004 Edition
19
: Mark the current position of the cylinder switch.
2
2
: Detach the air hoses from the cylinder or valve.
This will depressurize the lifting table cylinder and allow you to move the mechanism.
2
2
: With the machine switched on (the LED must be on), adjust the cylinder switch so that it
switches reliably when the lifting table height is 20 mm (height of the rubber buffer).
: Adjust the air regulator at the cylinder of the lifting table for the motion downward, if necessary.
2
Retrofit instructions SIPLACE S-27 HM Long Board Option
10/2004 Edition
20
: Raise the lifting table mechanism manually, otherwise you will not be able to fit the lifting table
bed.
2
Fix this position with an installation aid that should be removed once the lifting table bed is in-
stalled. 2
2
: Reconnect the air hoses.
: Plug the option plug into the conversion board.
2
2
2
2
2
2
X 36
X 36kt
X 37k
t
X 35kt
X 34kt
X 34kt
X 35kt
X 36kt
X 37k
t
X 36
X 37
Conversion board, assembly tray
(kt) 00359426-xx
Conversion board, assembly tray
(kt) 00359426-xx
Single conveyor
Coding plug
00371258-xx
Dual conveyor
Coding plug
00371258-xx
X36kt / X37kt
Retrofit instructions SIPLACE S-27 HM Long Board Option
10/2004 Edition
21
: Install the lifting table bed option.
: Use 2x M5x40 DIN912 to screw the support bracket in the desired position on the lifting table
bed .
: Bring the support rail into the desired position and tighten the screws.
2
2
2
2
2
"Long board"
support
LT path limiter