User Manual E-by-SIPLACE 用户手册 - 第151页

User manual E by SIPLACE 3 Technical data and assemblies From software version SC 712.1 Edition 05/2019 3.8 Feeder modules for E by SIPLACE 151 3 Fig. 3.8 - 2 8 mm E tape feeder module - back view (1) Entry to the tape g…

100%1 / 324
3 Technical data and assemblies User manual E by SIPLACE
3.8 Feeder modules for E by SIPLACE From software version SC 712.1 Edition 05/2019
150
3.8.1.4 Design of the tape feeder modules
The two following diagrams show the design of the tape feeder module for the E by SIPLACE.
3
Fig. 3.8 - 1 SIPLACE SmartFeeder E - front view
(1) Pogo-pin interface
(2) "Front" centering pin
(3) Lever for raising the pick-up window in order to thread in and remove the component tape
(4) Pickup window
(5) Tape guide channel outlet
(6) Cover foil rocker
(7) Cover foil packing wheels
(8) Locking latch
(9) Typeplate
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
User manual E by SIPLACE 3 Technical data and assemblies
From software version SC 712.1 Edition 05/2019 3.8 Feeder modules for E by SIPLACE
151
3
Fig. 3.8 - 2 8 mm E tape feeder module - back view
(1) Entry to the tape guide channel with tape spring
(2) Flap on cover foil container
(3) Removal handle, engaged
(4) Status display
(5) Operator panel
(6) Drive motors for the tape conveyor
(7) Front slider guide
(8) Back slider guide
(9) Drive motor for the cover foil packing device
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
3 Technical data and assemblies User manual E by SIPLACE
3.8 Feeder modules for E by SIPLACE From software version SC 712.1 Edition 05/2019
152
3.8.2 Technical data for the SIPLACE SmartFeeder E
In general, the tape feeder modules from the E by SIPLACE are approx. 587 mm long and approx.
200 mm high. The technical data are listed in the following table.
3
The maximum height of the interference contours above the upper edge of the tape pocket is
≤ 3 mm. As the feeder modules do not show any flaps projecting upwards and are also fixed to
the changeover tables, the risk of a head crash is reduced to a minimum.
Tape feeder module Item no. L x H
[mm]
Width
[mm]
Location Transport
increment
[mm]
Max. tape
height
[mm]
SIPLACE SmartFeeder 2x8 mm E 00141569 587x200 22.9 2 1/2/4/8 3.5
SIPLACE SmartFeeder 8 mm E 00141570 587x200 10.8 1 1/2/4/8 3.5
SIPLACE SmartFeeder 12 mm E 00141571 587x200 22.6 2 4 - 16
*a
16
SIPLACE SmartFeeder 16 mm E 00141572 587x200 22.6 2 4 - 20*
a
16
SIPLACE SmartFeeder 24 mm E 00141673 587x200 34.4 3 4 - 32*
a
25
SIPLACE SmartFeeder 32 mm E 00141674 587x200 46.2 4 4 - 40*
a
25
SIPLACE SmartFeeder 44 mm E 00141675 587x200 58.0 5 4 - 52*
a
25
SIPLACE SmartFeeder 56 mm E 00141676 587x200 69.8 6 4 - 64*
a
25
SIPLACE SmartFeeder 72 mm E
*b
n.a. 587x200 81.6 6 4 - 80*
a
25
SIPLACE SmartFeeder 88 mm E
*b
n.a. 587x200 105.2 6 4 - 96*
a
25
Tape reels 178 to 483 mm in diameter (7“ - 19“)
Changeover time ≤ 8 s
*)a In 4mm steps
*)b On request