User Manual E-by-SIPLACE 用户手册 - 第153页
User manual E by SIPLACE 3 Technical data and assemblies From software version SC 712.1 Edition 05/2019 3.9 Alternative E by SIPLACE feed er modules 153 3.9 Alternative E by SIPLACE feeder modules 3.9.1 SIPLACE StickFeed…
3 Technical data and assemblies User manual E by SIPLACE
3.8 Feeder modules for E by SIPLACE From software version SC 712.1 Edition 05/2019
152
3.8.2 Technical data for the SIPLACE SmartFeeder E
In general, the tape feeder modules from the E by SIPLACE are approx. 587 mm long and approx.
200 mm high. The technical data are listed in the following table.
3
The maximum height of the interference contours above the upper edge of the tape pocket is
≤ 3 mm. As the feeder modules do not show any flaps projecting upwards and are also fixed to
the changeover tables, the risk of a head crash is reduced to a minimum.
Tape feeder module Item no. L x H
[mm]
Width
[mm]
Location Transport
increment
[mm]
Max. tape
height
[mm]
SIPLACE SmartFeeder 2x8 mm E 00141569 587x200 22.9 2 1/2/4/8 3.5
SIPLACE SmartFeeder 8 mm E 00141570 587x200 10.8 1 1/2/4/8 3.5
SIPLACE SmartFeeder 12 mm E 00141571 587x200 22.6 2 4 - 16
*a
16
SIPLACE SmartFeeder 16 mm E 00141572 587x200 22.6 2 4 - 20*
a
16
SIPLACE SmartFeeder 24 mm E 00141673 587x200 34.4 3 4 - 32*
a
25
SIPLACE SmartFeeder 32 mm E 00141674 587x200 46.2 4 4 - 40*
a
25
SIPLACE SmartFeeder 44 mm E 00141675 587x200 58.0 5 4 - 52*
a
25
SIPLACE SmartFeeder 56 mm E 00141676 587x200 69.8 6 4 - 64*
a
25
SIPLACE SmartFeeder 72 mm E
*b
n.a. 587x200 81.6 6 4 - 80*
a
25
SIPLACE SmartFeeder 88 mm E
*b
n.a. 587x200 105.2 6 4 - 96*
a
25
Tape reels 178 to 483 mm in diameter (7“ - 19“)
Changeover time ≤ 8 s
*)a In 4mm steps
*)b On request
User manual E by SIPLACE 3 Technical data and assemblies
From software version SC 712.1 Edition 05/2019 3.9 Alternative E by SIPLACE feeder modules
153
3.9 Alternative E by SIPLACE feeder modules
3.9.1 SIPLACE StickFeeder E
Item no. 00288207-xx SIPLACE StickFeeder E
The SIPLACE StickFeeder E for E by SIPLACE can be used on any E by SIPLACE feeder table
The StickFeeder for E by SIPLACE will occupy 10 tracks on the feeder table.
3
Fig. 3.9 - 1 SIPLACE StickFeeder E
3.9.2 Operation, setting up and technical data
The operation, setting up and technical data are described in the StickFeeder E job guide,
[Item no.: 00198626-xx]
3 Technical data and assemblies User manual E by SIPLACE
3.9 Alternative E by SIPLACE feeder modules From software version SC 712.1 Edition 05/2019
154
3.9.2.1 Safety instructions for the SIPLACE StickFeeder E
3
3
3
3
Heavy weight of the SIPLACE StickFeeder E!
The heavy weight of the SIPLACE StickFeeder E (14 kg) could cause
injuries if the module is not handled correctly.
Do not lift or carry the module alone.
Use lifting aids and proper lifting techniques when removing or
replacing.
You might need to enlist the help of a second person.