User Manual E-by-SIPLACE 用户手册 - 第169页
User manual E by SIPLACE 4 Setting up and commissioning From software version SC 712.1 Edition 05/2019 4.1 Transportatio n and delivery configur ation 169 4 Setting up and commissioning 4.1 Transportation and delivery co…
3 Technical data and assemblies User manual E by SIPLACE
3.10 Changeover table for E by SIPLACE From software version SC 712.1 Edition 05/2019
168
User manual E by SIPLACE 4 Setting up and commissioning
From software version SC 712.1 Edition 05/2019 4.1 Transportation and delivery configuration
169
4 Setting up and commissioning
4.1 Transportation and delivery configuration
4.1.1 Shipping packaging
Within Europe, the machine and changeover tables will be shipped on two wooden pallets, pack-
aged in plastic film. Outside Europe, the machine and changeover tables are supplied in wooden
crates.
4.1.1.1 Shipping packaging dimensions
The dimensions of the pallets and wooden crates are listed in the following table:
4
Fig. 4.1 - 1 Transport crate - dimensions in millimeters
(A) Pallet jack attachment points
Wooden crate Machine (L x W x H) Changeover table (L x W x H)
Standard 2180 mm x 1770 mm x 1830 mm
1050 mm x 1050 mm x 1150 mm
Extended (with
1200 mm LBO)
2180 mm x 2330 mm x 1830 mm
4 Setting up and commissioning User manual E by SIPLACE
4.1 Transportation and delivery configuration From software version SC 712.1 Edition 05/2019
170
4.1.1.2 Weight of machine when ready for dispatch
The following table contains the weights of the machines prepared for dispatch, including packag-
ing.
4
4.1.2 Checking a delivery
Store the machine in the packaging until room temperature has been reached. There is oth-
erwise a risk of condensation occurring.
Check the delivery for damage.
Check the shock sensors on the transportation crate.
Unpack the machine and the accessories and check the delivery for completeness (reference
delivery note).
Document the results in the installation report /acceptance protocol.
4.1.3 Configuration when delivered
The machine is configured as follows when delivered:
– The track on the single conveyor is set to a width of 210 mm. This width setting will be import-
ant when fine-tuning the machine.
– The monitor is dismantled from the operator panel (HMI).
– The operator panel (consists of indicator lamps, keyboards and support plates) is dismantled
from the machine.
– The gantry axis is fixed with shipping braces.
Machine Dispatch within Europe Dispatch overseas
E by SIPLACE 2,080 kg 2,080 kg
Changeover table 180 kg 180 kg