User Manual E-by-SIPLACE 用户手册 - 第31页
User manual E by SIPLACE 1 Introduction From software version SC 712.1 Edition 05/2 019 1.7 Important not es on the user manual 31 1.7 Important notes on the user manual 1.7.1 Contents and fili ng of the user manual This…
1 Introduction User manual E by SIPLACE
1.6 SIPLACE Station Programming From software version SC 712.1 Edition 05/2019
30
The SIPLACE Station Programming provides the user at the station with all means that are re-
quired for a complete description of the placement program.
1
Fig. 1.6 - 1 SIPLACE Station Programming main view
(1) SIPLACE Station Programming - Job editor
(2) SIPLACE Station Programming - Job control
(3) SIPLACE Station Programming - Teach job
It is possible to work on the description while the placement of another program is still in process.
To ensure an exact specification of the placement positions, fiducials and placement positions can
be taught by the placement machine.
In this process, the semi-transparent outline of the component is displayed above the camera pic-
ture taken by the PCB camera. The outline can then be aligned with the contact points on the PCB.
The specified positions can directly be used and saved in the placement program.
Once the PCB is completely described and taught, it can be optimized and produced at the station.
(1)
(2)
(3
User manual E by SIPLACE 1 Introduction
From software version SC 712.1 Edition 05/2019 1.7 Important notes on the user manual
31
1.7 Important notes on the user manual
1.7.1 Contents and filing of the user manual
This user manual contains basic information that must be observed when setting up, operating
and maintaining the machine. The service engineers, qualified staff, operators and users plus sys-
tem owner must therefore read it before commencing installation and commissioning.The instruc-
tions must be kept permanently accessible where the machine is used.
In addition, the user must ensure that the employees have fully understood the contents of the
user manual.
1.7.2 Danger notes
1
1.7.3 Manufacturer's/supplier's liability
We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-
ture only and do not contain any contractual conditions or guaranties. The liability and obligations
assumed by ASM Assembly Systems Singapore Pte ltd can be found exclusively in the relevant
contract agreement concerning the supply of the machine described in this manual. This applies
in particular to all statements regarding performance or service life and the agreed liability for
faults or defects. The provisions of the contract regarding the liability for faults or defect are neither
extended nor restricted by any statements in this user manual.
WARNING
Read the user manual!
Only perform tasks on the machine if you have precise knowledge of the relevant sec-
tion in the user manual.
Observe all warnings, caution notes and hazard notes.
Please also read chapter 2 of this user manual through carefully.
1 Introduction User manual E by SIPLACE
1.7 Important notes on the user manual From software version SC 712.1 Edition 05/2019
32
1.7.4 Revision table
1
1.7.5 Further information about and contents of the documentation package
1.7.5.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:
ASM Assembly Systems Singapore Pte Ltd
535 Yishun Industrial Park A
ASM Tech-Park Building 2
Singapore 768775 1
Edition Amendments
05/2015 First Edition with SC.708.0
11/2015 Update version with SC.709.0 and minor changes
SIPLACE Component Reject Conveyor E
01/2017 Update version with SC.709.1
Laser class 2 and warning labels
SIPLACE SmartFeeder 72 mm E and 88 mm E on request
Technical data update and minor changes
Adjustable conveyor clamping
05/2019 Update version with SC.712.1 and minor changes
Formal adjustments
Double sided machine with fixed table on location 1 and location 2
SIPLACE LDU E
New HMI and indicator lamp