User Manual E-by-SIPLACE 用户手册 - 第56页
2 Operational safety User manual E by SIPLACE 2.2 Warning labels From software version SC 712.1 Edition 05/201 9 56 2.2.3 Warning label on th e changeover table insert Fig. 2.2 - 8 Warning labels on the changeover table …
User manual E by SIPLACE 2 Operational safety
From software version SC 712.1 Edition 05/2019 2.2 Warning labels
55
2.2.2.4 Warning label W204
2
W204 in fig. 2.2 - 5, page 50, item no. 03009343-01
Quantity per machine:
E by SIPLACE double sided: 1 2
E by SIPLACE single sided: 1 2
2
2
2
DANGER OF CRUSHING!
Reaching in here can lead to injuries to the arms, hands or
head.
Be cautious when doing troubleshooting or correction that
needs to access the inside of the machine.
2 Operational safety User manual E by SIPLACE
2.2 Warning labels From software version SC 712.1 Edition 05/2019
56
2.2.3 Warning label on the changeover table insert
Fig. 2.2 - 8 Warning labels on the changeover table insert
In fig. 2.2 - 8, page 56, hand crushing label, item no. 03118888-01 (2 labels on the left side and 2
labels on the right side).
Hand crushing
Hand crushing
Hand crushing
Hand crushing
2
RISK OF HAND CRUSHING!
Docking in and docking out the changeover table can result into crushing of
hands.
Docking in and docking out the changeover table.
Observe the description in Section 5.16 on page 250.
User manual E by SIPLACE 2 Operational safety
From software version SC 712.1 Edition 05/2019 2.2 Warning labels
57
2.2.4 Warning label W205 on the tape cutter
2
Fig. 2.2 - 9 Warning label W205 on the top of the tape cutter
– W205, item no. 03009344-01
2
WARNING
Risk of cuts!
Risk of cutting when working on the cutter!
Disconnect the machine from the power and compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.
Wear robust protective gloves when working on the tape cutter.
W205