User Manual E-by-SIPLACE 用户手册 - 第77页
User manual E by SIPLACE 2 Operational safety From software version SC 712.1 Edition 05/2019 2.5 Safety instru ctions for operating the machine 77 2.5.9 High temperatures on the SIPLACE SmartFeeder E 2 Fig. 2.5 - 4 High …
2 Operational safety User manual E by SIPLACE
2.5 Safety instructions for operating the machine From software version SC 712.1 Edition 05/2019
76
2.5.8 High temperatures on SIPLACE CP14 placement head
2
Fig. 2.5 - 3 High temperatures on SIPLACE CP14 during continuous operation
(1) Temperature label, item no. 03031926-01
(2) Housing for the star motor
(3) Handle
2
CAUTION
Risk of burns due to high temperatures!
The housing of the star motor and the handle on the placement head may become very
hot during continuous operation and in ambient temperature in excess of 22 °C.
Be careful when touching the parts.
(1)
(2)
(3)
User manual E by SIPLACE 2 Operational safety
From software version SC 712.1 Edition 05/2019 2.5 Safety instructions for operating the machine
77
2.5.9 High temperatures on the SIPLACE SmartFeeder E
2
Fig. 2.5 - 4 High temperatures on the SIPLACE SmartFeeder E during continuous operation
(1) Temperature label, item no. 03031926-01
(2) Stepping motor
2
CAUTION
Risk of burns due to high temperatures!
The stepping motors can become very hot during continuous operation and in an ambient
temperature in excess of 22 °C.
Be careful when touching the motors.
(1)
(2)
2 Operational safety User manual E by SIPLACE
2.6 Additional safety instructions for the machines From software version SC 712.1 Edition 05/2019
78
2.6 Additional safety instructions for the machines
2.6.1 Safety instructions for docking the changeover table in or out
2
2
2
2
2.6.2 Safety instructions for emptying the waste tape container
The waste tape container must be pulled out of the changeover table for emptying. There is a risk
of catching your thumbs as you do so. To prevent this, observe the safety instructions in section
5.9.2
, page 228.
WARNING
Operation only with changeover table!
The placement machine may only be operated if there is a changeover table present and
docked at each location.
Fill any free locations with dummy feeder modules as described in section 2.7.5.1,
page 88.
WARNING
DANGER OF CRUSHING!
Risk of crushing limbs when docking and undocking the changeover table.
Always dock/undock the changeover table alone.
CAUTION
Risk of breaking handles!
Risk of breaking handles when transporting the changeover table.
When transporting the changeover table, do not lift it by its handles.
CAUTION
Risk of injuring limbs!
Risk of injuring limbs when docking and undocking.
When docking and undocking, make sure that there are no body limbs in the travel
area of the changeover table.