00198382-03_UM_SIPLACE-CA4-V2_EN - 第127页
Instruction manual SIPLACE CA4 V2 3 Technical data and assemblie s From software version 713.0 Ed ition 12/2019 3.7 PCB conveyor syst em 127 3.7.3.2 Conveyor lanes and types The right-hand conveyor lane (viewed in the di…
3 Technical data and assemblies Instruction manual SIPLACE CA4 V2
3.7 PCB conveyor system From software version 713.0 Edition 12/2019
126
3.7.3 Dual lane conveyor
Item no. 0309888-xx Dual lane conveyor vario
3.7.3.1 Default variants
The dual lane conveyor has two conveyor lanes which are electrically and mechanically indepen-
dent of one another. The fixed conveyor side is on the right as a standard. The fixed conveyor side
can be selected either on the right or left for the dual lane conveyor. The position of the fixed side
can be set according to the specifications. The dual lane conveyor can be operated as a dual lane
or single lane conveyor, depending on your requirements.
3
Fig. 3.7 - 2 Dual lane conveyor structure
(1) Input conveyor
(2) Conveyor lane 1
(3) Lifting table 1
(4) Intermediate conveyor
(5) Conveyor lane 2
(6) Lifting table 2
(7) Output conveyor
T1 Conveyor lane 1
T2 Conveyor lane 2
(7)
(1)
(2)
(3)
(T1)
(T2)
(4)
(5)
(6)
Instruction manual SIPLACE CA4 V2 3 Technical data and assemblies
From software version 713.0 Edition 12/2019 3.7 PCB conveyor system
127
3.7.3.2 Conveyor lanes and types
The right-hand conveyor lane (viewed in the direction of conveyor) is known as "conveyor 1" while
the left conveyor lane is termed "conveyor 2" (see fig. 3.7 - 4
, page 128 ).
3.7.3.3 "Single lane conveyor" mode
The dual lane conveyor can be configured online as a single lane conveyor. One conveyor lane is
moved together completely and is disabled (see fig. 3.7 - 3
). This gives a conveyor lane width of
up to 510 mm.
3
Fig. 3.7 - 3 Dual lane conveyor in "single lane conveyor" mode
Dual conveyor with widened conveyor lane 2 (fixed
conveyor side on left)
Conveyor lane 2
deactivated
Conveyor lane 1 Conveyor lane 2 Conveyor lane 1
deactivated
PCB conveyor direction PCB conveyor direction
Stationary conveyor side
Dual conveyor with widened conveyor lane 1 (fixed
conveyor side on right)
Movable conveyor side
3 Technical data and assemblies Instruction manual SIPLACE CA4 V2
3.7 PCB conveyor system From software version 713.0 Edition 12/2019
128
3.7.3.4 Asynchronous conveyor mode
In asynchronous mode, only one PCB in a conveyor lane is processed. At the same time, another
PCB in the second conveyor lane is moved into the placement position. This saves the full con-
veying time of one PCB, thus considerably increasing performance, particularly for PCBs with a
short cycle time. Once the placement machine has received the job data (panel, setup), the
boards on the input conveyors are continuously transported to the available processing conveyor
(provided that the processing conveyor is free) throughout the placement operation. The place-
ment process begins as soon as a board is conveyed into the processing area. The PCBs are pro-
cessed one after another.
If the placement sequence is interrupted, the conveyor interface will be disabled and the PCBs
currently on the processing belts will be completed.
The conveyor interface is disabled or enabled simultaneously for both conveyor lanes.
3
Fig. 3.7 - 4 Conveyor modes
Synchronous conveyor mode
Asynchronous conveyor mode