00198382-03_UM_SIPLACE-CA4-V2_EN - 第303页
Instruction manual SIPLACE CA4 V2 7 Station extensions From software version 713.0 Edition 12/2019 7.9 Support pin 303 7.9 Support pin Item no. 001 19680-xx Suppor t pin Wide b oards tend to deflect du ring placement suc…
7 Station extensions Instruction manual SIPLACE CA4 V2
7.8 Fixed component table for tray feeders From software version 713.0 Edition 12/2019
302
7.8 Fixed component table for tray feeders
Item no. 00519990-xx Fixed component table for tray feeders
This component table is a fixed installation at the location and is required for use of the following
feeders:
– SIPLACE JTF-S
– SIPLACE JTF-M
It has room for a JTF-S or a JTF-M. The fixed component table can be fitted at location 2 and /or
location 3.
7
7
WARNING
Free locations with dummy feeder modules
Free locations need to be occupied with dummy feeders.
PLEASE NOTE
For more information, refer to the "User Guide JTF-S/JTF-M", German+English [Item No.
00197446-xx]
Instruction manual SIPLACE CA4 V2 7 Station extensions
From software version 713.0 Edition 12/2019 7.9 Support pin
303
7.9 Support pin
Item no. 00119680-xx Support pin
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting support pins on the lifting table.
7
7
Fig. 7.9 - 1 Support pin
7.10 Long board option (LBO)
Item no. 519874-xx X-Series S, LBO license
The "Long board" option allows you to place boards which exceed the specified board length.
7
PLEASE NOTE
The function can only be used for standard conveyors without vacuum tooling.
PLEASE NOTE
The function of this option depends on the board geometry and can only be used for stan-
dard conveyors without vacuum tooling.
7 Station extensions Instruction manual SIPLACE CA4 V2
7.10 Long board option (LBO) From software version 713.0 Edition 12/2019
304