00198382-03_UM_SIPLACE-CA4-V2_EN - 第308页

8 Maintenance Instruction manual SIPLACE CA4 V2 8.1 Safety instructions for maintenance work From software version 713.0 Edition 12/2019 308

100%1 / 322
Instruction manual SIPLACE CA4 V2 8 Maintenance
From software version 713.0 Edition 12/2019 8.1 Safety instructions for maintenance work
307
8
8
8
8.1.1 Safety instructions for hazardous substances
8
8
CAUTION
Cleaning and lubrication
Do not use any solvents for cleaning, use only ethanol!
Alternatively, you can also use isopropanol – IPA.
Cleaning with compressed air inside the placement machine or module assemblies
is expressly prohibited.
CAUTION
Risk of cutting at IC and FC camera
The edges of the mirror could cut your fingers.
Protect yourself by wearing laboratory gloves and avoid touching the edges.
Laboratory gloves are also a prerequisite for effective cleaning (fingerprints!).
CAUTION
Only one person may be in the area of each location at any one time.
The reason for this is to ensure the safety of the operating personnel or of a second per-
son. The two-hand operation of the component trolley insert only enables one person to
be reliably protected from danger.
CAUTION
Observe the safety data sheets
When handling hazardous substances, (e.g. Loctite 241, ethanol) observe the ap-
plicable safety data sheet.
8 Maintenance Instruction manual SIPLACE CA4 V2
8.1 Safety instructions for maintenance work From software version 713.0 Edition 12/2019
308
Instruction manual SIPLACE CA4 V2 Index
Edition 12/2019
309
Index
Symbols
"Head crash" sign
. . . . . . . . . . . . . . . . . . . . . . . .57
"Switching on the SIPLACE line" flow chart
. . .202
A
Abbreviations
. . . . . . . . . . . . . . . . . . . . . . . . . . .15
Adapter for the X-Series feeder modules
255, 256,
257
Adapter plate for label presenter
. . . . . . . . . . . .255
Adapter plate for reject conveyor
. . . . . . . . . . .257
Adapter plate, 16.5 mm
. . . . . . . . . . . . . . . . . . .256
Adapting the component trolley to the PCB convey-
or height
. . . . . . . . . . . . . . . . . . . . . . . . . . .185
Adjusting the empty tape duct to the component
height
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
Advanced production
. . . . . . . . . . . . . . . 193, 199
Air cushion conveyor system
. . . . . . . . . 167, 182
Alert
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210
Alert information, colors
. . . . . . . . . . . . . . . . . .214
Allen key, size 10
. . . . . . . . . . . . . . . . . . . . . . .167
Allen key, size 19
. . . . . . . . . . . . . . . . . . . . . . .167
Ambient conditions
Ambient pressure
. . . . . . . . . . . . . . . . . . . .100
Ambient conditions for machine operation
. . . .103
Ambient conditions for packaging, transportation
and storage
. . . . . . . . . . . . . . . . . . . . . . . .103
Ambient pressure
. . . . . . . . . . . . . . . . . . . . . . .100
A-Placement
. . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Assembly positions of MultiStar in the machine
119
Assembly positions of SIPLACE MultiStar
. . . .118
Atmospheric humidity
. . . . . . . . . . . . . . . . . . . .100
Authorized employees.
. . . . . . . . . . . . . . . . . . . .91
Avoiding track errors
. . . . . . . . . . . . . . . . . . . . .239
B
Basic view
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .205
Boards being processed
. . . . . . . . . . . . . . . . . .205
Buttons
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
C
C&P20 M2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
"Vacuum sensor hold circuit" board
. . . . . .112
Connection for the holding circuit
. . . . . . . 112
DP drive
. . . . . . . . . . . . . . . . . . . . . . . . . . 112
Handle
. . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Nozzle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Pressure control valve
. . . . . . . . . . . . . . . 112
Return cylinder
. . . . . . . . . . . . . . . . . . . . . 112
Star motor
. . . . . . . . . . . . . . . . . . . . . . . . . 112
Technical data
. . . . . . . . . . . . . . . . . . . . . 113
Z motor
. . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Carrying out a setup check
. . . . . . . . . . . . . . . 220
Carrying out a sight check
. . . . . . . . . . . . . . . . 222
Center of gravity
. . . . . . . . . . . . . . . . . . . . . . . 109
Center of gravity coordinates
. . . . . . . . . . . . . 109
Centering bar for holding the "back" centering pin for
X feeder module
. . . . . . . . . . . . . . . . . . . . 272
Centering holes, SIPLACE X-Series changeover ta-
ble
. . . . . . . . . . . . . . . . . . . . . . . . . . . 272, 273
Centering pin, SIPLACE X-Series changeover table
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Changeover table
Tray Stack Feeder
. . . . . . . . . . . . . . . . . . 302
Changing the setup
. . . . . . . . . . . . . . . . . . . . . 237
Printing out the conversion instructions before
changing the setup
. . . . . . . . . . . . . . . . . . 238
Replacing the feeder modules
. . . . . . . . . 238
Charging, static
. . . . . . . . . . . . . . . . . . . . . . . . . 92
Check functions
. . . . . . . . . . . . . . . . . . . . . . . . 206
Check sensors
. . . . . . . . . . . . . . . . . . . . . . . . 206
Check the X feeder module before inserting it
228
Checking a delivery
. . . . . . . . . . . . . . . . . . . . . 144
Checking the compressed air supply
. . . . . . . 153
Clamping piece
. . . . . . . . . . . . . . . . . . . . 173, 180
Closing the protective covers, safety instructions
.
63
CO
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Color coded markings
. . . . . . . . . . . . . . . . . . . 210
Color coding in the alert information
. . . . . . . . 214
Color-coding
. . . . . . . . . . . . . . . . . . . . . . . . . . 210
Combination options for white and green lamps
. .
219
Commissioning the machine
. . . . . . . . . . . . . . 143
Component coordinate system
. . . . . . . . . . . . 240
Component coordinate system and pickup angle
.
240
Component counter
. . . . . . . . . . . . . . . . . . . . . . 78
Component list
. . . . . . . . . . . . . . . . . . . . . . . . 206