00198382-03_UM_SIPLACE-CA4-V2_EN - 第64页
2 Operational safety Instruction manual SIPLACE CA4 V2 2.5 Safety instructions for operation From software version 713. 0 Edition 12/2019 64 2.5.2 Safety instructions for closing the si de sliding doors The side sliding …
Instruction manual SIPLACE CA4 V2 2 Operational safety
From software version 713.0 Edition 12/2019 2.5 Safety instructions for operation
63
2.5 Safety instructions for operation
2.5.1 Safety instructions for closing the protective covers
To avoid risk of injury when closing the protective covers on the placement machine, the operator
must instruct the personnel concerned to always follow the instructions below when handling the
protective covers.
2
2
Fig. 2.5 - 1 Safety instructions for closing the protective covers
(1) Grab handles
To open or close the protective covers, always take hold of these by the grab handles.
When closing, do not reach into the gap between the protective cover and the machine panel.
When closing the protective cover, make sure that the area in which it is swiveled is free of
obstruction and that no other people are at risk of injury.
CAUTION
Risk of crushing hands!
Risk of crushing hands if the protective covers are not closed correctly.
Close the protective covers correctly.
(1)
2 Operational safety Instruction manual SIPLACE CA4 V2
2.5 Safety instructions for operation From software version 713.0 Edition 12/2019
64
2.5.2 Safety instructions for closing the side sliding doors
The side sliding doors can be opened for easier access to the SWS. To avoid risk of injury when
closing the side sliding doors on the placement machine, the operator must instruct the personnel
concerned to always follow the instructions below when handling the side sliding doors.
2
2
Fig. 2.5 - 2 Safety instructions for closing the side sliding doors
(1) Handle on lever
(2) Side sliding doors
When opening or closing the side sliding doors (item 2 of fig. 2.5 - 2, page 64), always take
hold of them at the handle (item 1 of fig. 2.5 - 2
, page 64) and press down the lever.
When closing, do not reach into the gap between the side sliding doors and the machine
panel.
CAUTION
Risk of crushing hands!
Risk of crushing hands if the side sliding doors are not closed correctly.
Close the side sliding doors correctly.
(1)
(2)
Instruction manual SIPLACE CA4 V2 2 Operational safety
From software version 713.0 Edition 12/2019 2.5 Safety instructions for operation
65
When closing the side sliding doors, make sure that the area in which they are closed is free
of obstruction and that no other people are at risk of injury.
2.5.3 Manual insertion of board into the input conveyor
2
Observe the warning instructions when inserting boards into the input conveyor.
Start moving the board into the conveyor with the Move Board In function on the SC GUI.
2.5.4 Safety instructions for processing capacitors based on powdered metal
There is a risk associated with processing capacitors based on powdered metal (e.g. tantalum).
The risk is that
– an exothermic reaction, i.e. a sudden build-up of heat, may occur, if these components are
damaged. If the ambient conditions are unfavorable, and depending on the capacitance, this
buildup of heat can cause damage.
– This effect can occur when these components are cut.
Please contact your suppliers to clarify whether the components that you handle are affected.
In extremely rare cases, this risk can occur in the tape cutter of SIPLACE machines, with the re-
mote possibility of causing a smoldering fire in the waste tape.
WARNING
Risk of injury to hands!
When manually inserting the board into the input conveyor, hands could be caught by the
gantry when it starts to move and injured due to unprohibited access to the hazard area
of the gantry.
Do not manually place boards into the machines or placement lines released for pro-
duction.
Manual insertion of boards is only permitted during the installation phase of the
placement machine (placement machine calibration, test placement, etc.).
Only qualified staff may manually insert boards.
The operating company is responsible for ensuring that the input and output convey-
ors are covered to prevent anyone reaching into these areas with hands or arms. All
upstream and downstream modules (screen printers, conveyors, inspection sys-
tems, ovens, etc.) must take these same precautions.