UniSite_xpi_User_Manual - 第305页
Disk error, term inal type not saved! Disk open e rror. Type ESC and Control W to reb oot. Disk write- prote cted, termina l type n ot saved! Done. Done. Bytes copi ed = nnnnnn. Done: Certa in te sts not perfo rmed due t…
DEVICE SPECIFIC FAILURE: Security fuse programmed or bad device.
DEVICE SPECIFIC FAILURE: Software data protect failure.
DEVICE SPECIFIC FAILURE: Test fuse programming error.
DEVICE SPECIFIC FAILURE: Un-supported Operation.
DEVICE SPECIFIC FAILURE: Verify error due to non-blank device.
DEVICE SPECIFIC WARNING: Generic non-fatal device-specific error.
DEVICE SPECIFIC WARNING: Part has been programmed over 128 times.
Disk access error.
Disk boot err
Disk data error.
Disk duplication overwrites user RAM. Hit Return to continue, ^Z to abort.
Disk Error - Defective or Wrong Size Disk. Press F3.
Disk error, terminal type not saved!
Disk open error. Type ESC and Control W to reboot.
Disk write-protected, terminal type not saved!
Done.
Done. Bytes copied = nnnnnn.
Done: Certain tests not performed due to Socket not empty.
Edit begin address must be greater than or equal to offset.
Elec Erase Err
Elec ID Err
Electronic bulk erase not supported by device.
Electronic ID not supported by device.
Empty Socket.
Empty Socket
End of file.
Entry into CRC not allowed during job file recording or playback.
ER_ALG_DYN_LINK
Extension ‘.SYS’ is reserved for system use.
Factory setting save file is protected:
Fatal system err
File already exists.
File does not exist.
FILE ERROR: Cannot access yield data.
FILE ERROR: Can’t reach track 0.
FILE ERROR: Data transfer error.
FILE ERROR: Disk change detected.