UniSite_xpi_User_Manual - 第307页
TEST ABORTE D: Wa veform board test mus t pass be fore PCU can be te sted. TEST HALTED : Soc ket not empty , hit re turn to c ontinue, ^Z to abo rt. Testing The operati on wa s not enabled . Transferrin g dat a. [transpa…
Empty Socket
End of file.
Entry into CRC not allowed during job file recording or playback.
ER_ALG_DYN_LINK
Extension ‘.SYS’ is reserved for system use.
Factory setting save file is protected:
Fatal system err
File already exists.
File does not exist.
FILE ERROR: Cannot access yield data.
FILE ERROR: Can’t reach track 0.
FILE ERROR: Data transfer error.
FILE ERROR: Disk change detected.
TEST ABORTED: Waveform board test must pass before PCU can be tested.
TEST HALTED: Socket not empty, hit return to continue, ^Z to abort.
Testing
The operation was not enabled.
Transferring data.
[transparent mode]
Trc init err
Too many revisions of the same Custom Menu algorithm.
Unable to load algorithm. Perform the Restore System Parameters operation.
Unable to load power up device algorithm.
Unknown command.
Unknown I/O format.
Updating device algorithms.
User disk space exhausted.
User RAM full.
User RAM sumcheck = ssssssss.
Using Keep Current algorithm in filename.KCx.
Variable Vcc Verify not supported on device selected.
Vector out of range.
Verify (1st pass)
Verify (2nd pass)
Verify (2 passes)
Waiting for self-test completion.
WARNING Algorithm disk in drive. Hit return to continue, ^Z to abort.
WARNING: Boot files on disk. Hit Return to continue, ^Z to abort.