EUKYX-199-2100_G5S2_Instruction_Vol2_E - 第106页

EUKYX 1-56 199-2100 4 . 2 .16 M 2 M When the [ M2M ] but ton is p ressed on t he "Opr . M ode" t ab sheet, the foll owing w indow a ppears. F2A42E AOI feedback function Select "Enable" or "Di s a…

EUKYX

1-55199-2100

4.2.15 SL Feeder

When the [SL Feeder] button is pressed on the "Opr. Mode" tab sheet, the following window

appears.

[1]

[2]

F2A42D

[1] Block after other recovery

Select "Enable" or "Disable" for the function to mount the components loaded from SL feeder later

on.

Disable

Select this when Block after other recovery is not used.

Enable

Select this when Block after other recovery is used.

[2] Loading ahead

Select "Enable" or "Disable" for the function to reduce the waiting time by loading the SL feeder in

advance.

Disable

Select this when Loading ahead is not used.

Enable

Select this when Loading ahead is used.

4.2 "Opr.Mode" Tab Sheet

EUKYX

1-56199-2100

4.2.16 M2M

When the [M2M] button is pressed on the "Opr. Mode" tab sheet, the following window appears.

F2A42E

AOI feedback function

Select "Enable" or "Disable" for the function to display the NG information on the machine when

LISA received the NG information from the AOI

AOI feedback function sends the NG information from AOI to LISA.

LISA sends it to the machine.

Disable

Select this when AOI feedback function is not used.

Enable

Select this when AOI feedback function is used.

Note

4.2 "Opr.Mode" Tab Sheet

EUKYX

1-57199-2100

4.3 "Test Mode" Tab Sheet

When the [Test Mode] tab is pressed on the "OPERATION" window, the following tab sheet

appears.

[1]

[2]

[1]

[2]

Graphic

Development

F2A43

The number of test run patterns to be saved is up to three.

[1] TEST PATTERN

The pattern where the test operation mode has been designated, is selected in this data box.

[2] [Pattern #1], [Pattern #2], and [Pattern #3] Buttons

Select one of the buttons to specify the desired pattern for designation of the test mode.

Wrong selections (test run in wrong modes) will cause various deﬁciencies such as component

picks by vacuum nozzles, scattering of components, or collision with the chute, etc.

Notice