EUKYX-199-2100_G5S2_Instruction_Vol2_E - 第116页
EUKYX 2-3 199-2100 2. Composition of Pattern Program 2. C ompo si tion o f Pa tt ern P rogra m The pattern program is composed of the fol low in g data. Pattern Program (Chapter 2) Pattern Program Common SET (3.1) (B01) …
EUKYX
2-2199-2100
1. Outline of Pattern Program
[2] Edited Data Display Area
The data items selected in the pattern program menu are displayed in this area.
[3] Tool Bar
The operation commands that can be executed in the data edit window, are collectively displayed
as icons.
Icons Description
When selected, the data is checked.
Whether or not the data is completed, is checked.
When selected, the data is optimized.
Note
When pressed, the machine components are searched.
When selected, the data within the selectable range is cutout.
When selected, an empty line is added to the last portion.
An empty line is added to the last line.
When selected, an empty line is added to the cursor position.
An empty line is added to any position.
When selected the current file is saved.
The file currently in the course of editing, is saved.
In the case of new file, the file is to be saved with a new name.
When selected, the file is saved with a new name.
The file currently in the course of editing, is saved with a new
name.
When selected, the window is returned.
The "Product." window is returned.
[4] Data Edit Window
The ten-key pad or list selection buttons appropriate for the data selected in the pattern program
menu, are displayed in this window.
[AC] Button : When pressed, the data in the course of the entry operation, is cleared.
[BS] Button : When pressed, a backspace is given to the data in the course of the entry
operation.
[Bk.] Button
[Fr.] Button : When pressed, the displayed window is changed.
[Set] Button : When pressed, the entered numerical value or selected item is set.
EUKYX
2-3199-2100
2. Composition of Pattern Program
2. Composition of Pattern Program
The pattern program is composed of the following data.
Pattern Program (Chapter 2)
Pattern Program
Common SET (3.1)
(B01)
PCB (3.2)
Operation (3.3)
Control (3.4)
PL Head/Nozzle (3.5)
CMPNT PL (3.6)
Component Library
Component ID
Placement (3.7)
HDLG/PL (3.8)
Function Data (C01)
PEC Recognition Mark Data (C02)
Operation Data (C03)
Setup Data (C04)
Control Data (D01)
PCB Locate Data (D02)
Transfer Speed Data (D03)
Nozzle Place Data (E01)
Block 1(2)
Nozzle Stk 1 Data (E02)
Offset (G02)
P-Data (G03)
O-Data (G04)
Un
Support Pin Data (C05)
PCB Recog
PCB Data
Set-up
Nozzle Stk 2 Data (E02)
(F01)
(3.1) to (3.8): Reference section
(B01) to (G04): Reference No.
F2B2
EUKYX
2-4199-2100
2.1 Composition of Common SET
2.1 Composition of Common SET
This data is used in the dual transfer operation (option).
2.2 Composition of PCB Data
The set parameters are used to set the PCB size and reference, etc.
Items Ref. No.
PCB Size X (Horizontal)
Y (Vertical)
T (Thickness) [mm]
(B01_01)
PCB origin offset X (Horizontal)
Y (Vertical) [mm]
Z (Angle) [deg]
X/Y Coordinate Angle [deg]
X-Direction
Y-Direction
Z-Direction
(B01_02)
PCB height offset (B01_03)
PCB Positioning Reference (B01_04)
Complibrary placement offset (B01_05)
PCB Warpage (B01_06)
Lot Name (B01_07)
Comment 1 and Comment 2 (B01_08)
Note