EUKYX-199-2100_G5S2_Instruction_Vol2_E - 第241页

EUKYX 6-4 199-2100 3. "PP CHANGE" W indow [ 5] [F dr . Loc. Chk ] But ton Us ing thi s button, the feed er locati ons specified i n the Cmt PP and the feeder t ype are disp la yed. Refer to Cha pter 1 , “ 3 . “…

EUKYX

6-3199-2100

3. "PP CHANGE" Window

The "PP CHANGE" window appears.

[1]

[3]

[4]

[5]

[6]

[7]

[8]

[2]

Graphic

Development

F2F4A

[1] Cmt PP

The pattern program currently selected is displayed in this section.

[2] Pattern Program Select tabs

The data items displayed in "[3] Pattern Program List" are divided into the tab sheet items and

displayed.

[3] Pattern Program List

The registered pattern programs are displayed as a list.

[4] [Edit] Button, [Del] Button, [Search] Button, and [Noz Check] Button

[Edit] Button : When pressed, the pattern program selected in the "[3] Pattern Program

List" is edited.

[Del] Button : When pressed, the pattern program selected in the "[3] Pattern Program

List" is deleted.

[Search] Button : When pressed, the pattern program is searched from the Pattern Program

List.

[Noz Check] Button : When pressed, the deficient number of nozzles to be used for the

pattern program selected in the "[3] Pattern Program List" or nozzles

located on the machine are displayed.

EUKYX

6-4199-2100

3. "PP CHANGE" Window

[5] [Fdr. Loc. Chk] Button

Using this button, the feeder locations specified in the Cmt PP and the feeder type are displayed.

Refer to Chapter 1, “3. “Comp.Reload” Window”, [13] [Fdr.Loc.Chk.] button for the details of

the “Fdr.Loc.Chk.” window.

[6] [Setup all Line Select] Button

Using this button, the setup setting in the pattern program change is performed. Whether or not the

conveyor width, support pin or nozzle is changed, is set.

F2F5A

►

Prgm Change

PCB Count : Whether or not the number of PCBs to be produced is cleared, is set in this

selection box.

PP.M NG.DT : Whether of not the pattern program management data is cleared, is set in this

selection box.

►

Cnvr.Width

Whether or not the conveyor width is setup, is set in this selection box.

►

PCB Sup.Pins Chg.Noz.

Whether or not the support pins are changed automatically, is set in this selection box.

• Set

Select “Disable”, “Enable” or “Store” for the automatic exchange of support pins when changing

program.

Disable : The support pins are not changed automatically when changing program.

Enable : The support pins are changed automatically when changing program.

Storage : The support pins are stored when changing program.

• Same Plc Chk

Select “Disable” or “Enable” for the support pin arrangement check if the arrangement of the

support pins when changing program is same as the previous one.

Enable : The support pin arrangement check is performed if the arrangement of the

support pins when changing program is same as the previous one.

Disable : The support pin arrangement check is not performed if the arrangement of the

support pins when changing program is same as the previous one.

Reference

EUKYX

6-5199-2100

3. "PP CHANGE" Window

►

Noz.Chg.

The nozzle change operation is set in this selection box.

• Set

Select "Disable", "Enable" or "Store" for the nozzles to be replaced when changing program.

Disable : The nozzles are not replaced when changing program.

Enable : The nozzles are replaced when changing program.

Storage : The nozzles are stored when changing program.

• Multi Noz Chk

Select "Disable" or "Enable" for the multi nozzle ID check after replacing the

nozzle when

changing program.

Disable :

The multi nozzle ID is not checked after replacing the nozzle when changing

program.

Enable :

The multi nozzle ID is checked after replacing the nozzle when changing

program.

[7] [Prgm Chng] Button

When pressed, the pattern program is changed to the one selected in the “[3] Pattern

Program List ”.

[Line] Button

This button is pressed when the pattern program in all the machines in the line is to be

changed.

This shows that the pattern program in all the machines in the line is to be

changed.

This shows that the pattern program in the single specified machine is to be

changed.

When the line consists of a single machine, this button is not displayed.

[8] “PP Chng Rcl” Tab Sheet

The pattern program change history is displayed in this section. The editing, deleting, and changing

program are available from the pattern program change history list.

F2F6A

Note