EUKYX-199-2100_G5S2_Instruction_Vol2_E - 第242页
EUKYX 6-5 199-2100 3. "PP CHANGE" W indow ► Noz.Chg. The no zzle c han ge operation i s s et in th is sel ec tion bo x. • Set Select "Disable" , "Enable" or "Store" for the no z zl…
EUKYX
6-4199-2100
3. "PP CHANGE" Window
[5] [Fdr. Loc. Chk] Button
Using this button, the feeder locations specified in the Cmt PP and the feeder type are displayed.
Refer to Chapter 1, “3. “Comp.Reload” Window”, [13] [Fdr.Loc.Chk.] button for the details of
the “Fdr.Loc.Chk.” window.
[6] [Setup all Line Select] Button
Using this button, the setup setting in the pattern program change is performed. Whether or not the
conveyor width, support pin or nozzle is changed, is set.
F2F5A
►
Prgm Change
PCB Count : Whether or not the number of PCBs to be produced is cleared, is set in this
selection box.
PP.M NG.DT : Whether of not the pattern program management data is cleared, is set in this
selection box.
►
Cnvr.Width
Whether or not the conveyor width is setup, is set in this selection box.
►
PCB Sup.Pins Chg.Noz.
Whether or not the support pins are changed automatically, is set in this selection box.
• Set
Select “Disable”, “Enable” or “Store” for the automatic exchange of support pins when changing
program.
Disable : The support pins are not changed automatically when changing program.
Enable : The support pins are changed automatically when changing program.
Storage : The support pins are stored when changing program.
• Same Plc Chk
Select “Disable” or “Enable” for the support pin arrangement check if the arrangement of the
support pins when changing program is same as the previous one.
Enable : The support pin arrangement check is performed if the arrangement of the
support pins when changing program is same as the previous one.
Disable : The support pin arrangement check is not performed if the arrangement of the
support pins when changing program is same as the previous one.
Reference
EUKYX
6-5199-2100
3. "PP CHANGE" Window
►
Noz.Chg.
The nozzle change operation is set in this selection box.
• Set
Select "Disable", "Enable" or "Store" for the nozzles to be replaced when changing program.
Disable : The nozzles are not replaced when changing program.
Enable : The nozzles are replaced when changing program.
Storage : The nozzles are stored when changing program.
• Multi Noz Chk
Select "Disable" or "Enable" for the multi nozzle ID check after replacing the
nozzle when
changing program.
Disable :
The multi nozzle ID is not checked after replacing the nozzle when changing
program.
Enable :
The multi nozzle ID is checked after replacing the nozzle when changing
program.
[7] [Prgm Chng] Button
When pressed, the pattern program is changed to the one selected in the “[3] Pattern
Program List ”.
[Line] Button
This button is pressed when the pattern program in all the machines in the line is to be
changed.
:
This shows that the pattern program in all the machines in the line is to be
changed.
:
This shows that the pattern program in the single specified machine is to be
changed.
When the line consists of a single machine, this button is not displayed.
[8] “PP Chng Rcl” Tab Sheet
The pattern program change history is displayed in this section. The editing, deleting, and changing
program are available from the pattern program change history list.
F2F6A
Note
EUKYX
6-6199-2100
4. "CNVR Set-up" Window
4. "CNVR Set-up" Window
The "CNVR Set-up" window appears.
[1]
[2]
[5]
[4]
[3]
[6]
Graphic
Development
MTN:NotRdy RCG:NotRdy
F2F7
[1] "Set-up Mode" Group Box
Each function in this group box can be used for the manual replacement work of the support pins.
(a) The window above displays the automatic replacement of support pins. When replacing
support pins manually, the display of "Set-up Mode" is different from above.
(b) The manual replacement of support pins is available with setting below.
[Product] - [Prod.Dt.] - [PP.Data] - [Operation] - [Set-up] - [Support pin] - [Not Exchange].
(c) Even if the support pins are set to "Exchange", they are not replaced automatically when
switching the pattern program by selecting [Set-up] - [Setup all Line Select] - [PCB Sup.
Pins Chg.Noz.] - [Set] - [Disable]. However, support pins can be replaced automatically
on the”CNVR Set-up” window.
(d) The support pins are replaced automatically when switching the pattern program with
the settings (1) + (2).
(1) [Product] - [Prod.Dt.] - [PP.Data] - [Operation] - [Set-up] - [Support pin] - [Exchange]
(2) [Set-up] - [Setup all Line Select] - [PCB Sup. Pins Chg.Noz.] - [Set] - [Enable]
Note