EUKYX-199-2100_G5S2_Instruction_Vol2_E - 第262页

EUKYX 6-25 199-2100 7. "T est&T ch" Submenu 7 . " Te s t &Tc h" S u b m e n u Graphic Development F2F32A The "T est & T ch" menu i s provi d ed with the fol lowi ng 1 0 buttons. …

EUKYX

6-24199-2100

6.3 "MNL XFER" Window

This "MNL XFER" window enables the operator to transfer a PCB manually.

[2]

[4]

[3]

[1]

Graphic

Development

F2F31

[1] Conveyor Image Display Section

Each block of the conveyor, of which an image is displayed, functions as a button. When the

conveyor block button is pressed and within 10 seconds, the [START] button on the operation panel

is pressed, the PCB is transferred to the position.

[2] PCB LOCATE L and PCB LOCATE R

Using these buttons, PCB positioning is performed.

When the [Exec.] button is pressed and within 10 seconds the [START] button is pressed on the

operation panel, the PCB is positioned while the [START] button is being held down. When the

[Rlse.] button is pressed and within 10 seconds the [START] button is pressed on the operation

panel, the PCB positioning is released while the [START] button is being held down.

[3] [Stpr L] and [Stpr R]

Using these selection buttons, the stopper positioning is performed.

When the [UP] button is pressed and within 10 seconds the [START] button is pressed on the

operation panel, the selected backup base (stopper) is moved up while the [START] button is being

held down. When the [DOWN] button is pressed and within 10 seconds the [START] button is

pressed on the operation panel, the selected backup base (stopper) is moved down while the

[START] button is being held down.

[4] XFER Start

When the arrow button showing the direction to where the conveyor is to be moved, is pressed,

and within 10 seconds the [START] button is pressed on the operation panel, the conveyor is moved

while the [START] button is being held down.

EUKYX

6-25199-2100

7. "Test&Tch" Submenu

Graphic

Development

F2F32A

The "Test&Tch" menu is provided with the following 10 buttons. When each button is pressed, the

corresponding window appears.

Buttons Description

Fdr P-u Tch Teaches operation related to the pick-up position.

Plc pos Tch Checks and performs Place Pos Teach. The teach result is reflected to P and O

data.

Comp Rcg The corresponding window enables the operator to perform the component

recognition test for the component designated in the test ID.

PEC Rcg Performs the PEC recognition mark test.

Tray Matrix Used when the multi-layer tray feeder (option) is used.

Tr P-u Pos Used when the multi-layer tray feeder (option) is used.

Ecc Pos Ofst Performs the pick-up position teaching for the component which can not be

picked up at its center.

Plc Pos Corr Performs Place Pos Teach. The result is reflected to pickup/place data.

Noz Level / Pos Teaches the positions and levels of the nozzles X and Y.

Odd-Noz Level /

Pos

Teaches the positions and levels of the odd shaped nozzles X and Y.

Plc Ofst Teaches the Placement Offset and reflects the teaching result to the component

library.

EUKYX

6-26199-2100

7.1 "Fdr Pick-up Tch" Window

In this window, the teaching is performed with the manual alignment operation using the PEC

recognition camera, for the offset data items to absorb the dispersion caused by each feeder’s

difference in characteristics, out of the offset data items related to the feeder’s component pick-up

operation on the feeder base.

Graphic

Development

F2F33

[1] [Head Sel] Button

The buttons showing each head are displayed as images.

Using these buttons, the head (PEC recognition camera) to be used in the teaching is selected.

[2] [Block Sel] Button

The buttons showing each feeder base are displayed as images.

Using these buttons, the block where the teaching is performed, is selected.

[3] Tape Feeder List

Selects the tape feeder to be taught from the selected block.

[4] Tch Skip Mode

Select “Disable“ or “Enable“ for teach skip mode.

Disable

: Teach skip mode is not used.

Enable : Teach skip mode is used. Teaching is not performed for the feeder that “Skip“ or

“Finished“ is displayed in the “Teaching“ column.

[5] [Activate] Button

When pressed, the "Manual Alignment" window appears for the selected tape feeder No.

[6] [Auto Tch] Button

Teaching for all tape feeders of selected block is performed automatically.