EUKYX-199-2100_G5S2_Instruction_Vol2_E - 第275页
EUKYX 6-38 199-2100 7.3 "COMP RCG" T est Window 7 .3 "COMP RC G " T est Windo w The correspondin g tab sheet enables the operator to test to c heck that the component desi gnated in the T est ID , is …
EUKYX
6-37199-2100
7.2 "Place Pos Teach" Window
(6) When new placement position is to be registered formally, press the [Save/End] button. (The
"Confirmation to Saving" window will appear ("If a data has no temporal registration, the
teaching result cannot be saved").)
F2F41
To replace the current pattern program data with the new one ("Save" Command)
When the [Yes] button is pressed on the "Confirmation to Saving" window, the "Confirmation
to Saving" message is displayed ("Overwrite data. Is it OK?")
F2F42
Maintaining the Current Pattern Program Data (Save As)
When the [No] button is pressed on the "Confirmation to Saving" message window ("Overwrite
it. Is it OK?"), the "String key" window appears. Enter new file name and press the [Set]
button. The temporarily entered pattern program will be saved with the newly entered file
name.
F2F43
Deleting the Teach Data (All Teach Data Delete)
Press the [No] button on the "Confirmation to Saving" window ("Would you like to save the
data registered temporarily to the pattern program?
(If the data has not temporal registration, the teaching result cannot be saved)").
EUKYX
6-38199-2100
7.3 "COMP RCG" Test Window
7.3 "COMP RCG" Test Window
The corresponding tab sheet enables the operator to test to check that the component designated in
the Test ID, is recognized normally.
Graphic
Development
F2F44
The "COMP RCG" test window is provided with the following tab sheets.
Tabs Description
Select from list The corresponding tab sheet enables the operator to test to check that the
component designated in the Test ID, is recognized normally.
Sel. from CompDt The corresponding tab sheet enables the operator to test to check that the
component is recognized normally by means of designating the Test ID used
in the block.
Library Teaching
New Creation
The corresponding tab sheet enables the operator to create new component
library teaching data.
EUKYX
6-39199-2100
7.3 "COMP RCG" Test Window
7.3.1 "Select from list" Tab Sheet
When the [Select from list] tab is pressed on the "COMP RCG" test window, the following tab sheet
appears.
[1]
[3]
[2]
[4]
[5]
[6]
[7]
[8]
[9]Graphic
Development
F2F45
[1] Test ID Selection Tabs
ALL : All the test IDs are displayed.
A to Z : The test IDs with an alphabetical first character are displayed.
0 to 9 : The test IDs with a numerical first character are displayed.
Mark : The test IDs with a symbolic first character are displayed.
[2] Test ID Display Change Tabs
Using these tabs, the indication in the Test ID List is changed.
Time order : The test IDs are displayed in the order of saving date starting from new one.
Alph order : The test IDs are displayed in alphabetical order.
[3] Component ID List
The test ID for which the component recognition test is performed, is selected in this pane.
[4] Page Change Button
[
] Button : When pressed, the top page is displayed.
[
] Button : When pressed, the previous page is displayed.
[
] Button : When pressed, the next page is displayed.
[
] Button : When pressed, the last page is displayed.
[5] [Edit] Button
When this button is pressed, the test ID selected in [3] is edited.
Refer to “Chapter 3 Component Library” for the editing procedure.
Reference