EUKYX-199-2100_G5S2_Instruction_Vol2_E - 第294页
EUKYX 6-57 199-2100 [ 1 3 ] [ ] But t on Thi s mak e s it possi bl e to in ser t leads and ba lls i nto the lead and ba l l mi ssi ng areas. The condi tion tha t va l ida tes the but ton is the same as [1 2]. For examp l…
EUKYX
6-56199-2100
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
F2F59
[8] [ ] Button
This checks the created library data.
[9] [
] Button
When this button is pressed, the previous library data item is back.
The component graphic image position is not returned.
[10] [
] Button
When this button is pressed, the previous library data item is returned.
The component graphic image position is not returned.
[11] [
] Button
This opens a data round-up dialog, making it possible to round up the data based on the specified
unit of measurement.
[12] [
] Button
This specifies the missing leads and balls. When you click the lead group or the ball group to be
selected as an object group for missing lead or ball detection, the color of the graphic squares changes
from “Green” to “Yellow”, indicating that this button has become valid. After clicking the button,
enclose the leaded portion to be specified as a missing area with the track ball as shown below.
When “IC (Simple)”, “Connector (Simple)”, or “Other Leaded (Simple)” is selected in the
“Component Shape” text box, one place can be specified for one group. In the case of “IC
(Complex)”, “Connector (Complex)”, or “Other Leaded (Complex)”, up to three places can be
specified. In the case of “BGA/CSP”, up to forty places can be specified.
F2F60
Note
Note
Note
7.3 "COMP RCG" Test Window
EUKYX
6-57199-2100
[13] [ ] Button
This makes it possible to insert leads and balls into the lead and ball missing areas.
The condition that validates the button is the same as [12].
For example, this button can be used effectively for such a BGA as shown below.
Specify the missing
area with the
[ ] button.
Insert balls into
the missing area
with the [ ]
button.
Specify the missing
area again with the
[ ] button.
Insert balls again
into the missing
area with the
[ ] button.
F2F61
[14] [ ] Button
When selected, this button deletes one electrode.
After pressing this button, click the electrode to be deleted.
[15] [
] Button
When selected, this button inserts one electrode. After pressing this button, click any area inside
the window and drag the pointer to the place where the electrode should be inserted.
F2F62
[16] [ ] Button
When selected, this button enables you to enclose several electrodes with a dotted frame for the
selection. This type of selection is useful when several electrodes should be slightly moved at a time.
F2F63
[17] [ ] Button
When selected, this button selects all electrodes.
This type of selection is useful when all electrodes should be slightly moved from the mold center.
7.3 "COMP RCG" Test Window
EUKYX
6-58199-2100
[19] [20]
[18]
F2F64
[18] [ ] Button
A ten-key pad appears for data entry.
[19] [increase / decrease] Button 1
Pressing the button for each unit directly increases or decreases the numerical value.
[20] [increase / decrease] Button 2
Selecting each unit of "× 1(0.01)" "× 10(0.1) and "× 100 (1)", increases or decreases the numerical
value in the selected units.
7.3 "COMP RCG" Test Window