EUKYX-199-2100_G5S2_Instruction_Vol2_E - 第325页

EUKYX 6-88 199-2100 8. "PCB.CNT ." Window 8 . " PCB. CNT . " Windo w Thi s wi ndow enab les the operator to set the number of PCBs to be produced. [2] [1] Graphic Development F2F122 [ 1 ] PCB Count er…

EUKYX

6-87199-2100

7.5 "PU Pos Ofst Tch" Window

[9] [Re-Recogition] Button

After pressing this button, the recognition image is touched in the matching window to re-recognize

the pockets.

When the pocket recognition is unavailable due to the feeder type, the [Re-Recognition] button

is not displayed.

[10] [End] Button

Pressing this button displays the confirmation window to save teaching data.

[Yes] button: Teaching data is reflected to component library data and overwritten.

[No] button: The saving of teaching data is canceled.

• Re-Recognition Procedure

(1) Press the [Re-Recognition] button on the Matching Window.

(2) Touch the position around the pocket to be re-recognized.

(The graphic image is moved.)

• Teaching Procedure

(1) Press the [Fdr Select] button to select the feeder for which the teaching operation is

performed.

(2) Press the [Move & Adjust] button. (The move & adjust recognition window will be displayed

to enable the manual alignment operation).

(1)

(5)

(2)

(4)

Correction value of pickup position

(3)

F2F121

(3) Move the eccentric pick-up position of the subject for which the manual alignment operation

is performed, so that it is the center of the cross hairs using the image movement button in

the recognition window.

(4) Press the [OK] button to determine the position. (The teaching results are displayed in the

data boxes for the pick-up position corrected values.)

(5) Press the [Save] button. (The confirmation window for the data saving will be displayed).

• When [Yes] is pressed, the data is reflected on the component library data and saved.

• When [No] is pressed, the data saving operation is stopped.

Note

Procedure

EUKYX

6-88199-2100

8. "PCB.CNT." Window

This window enables the operator to set the number of PCBs to be produced.

[2]

[1]

Graphic

Development

F2F122

[1] PCB Counter Stop Mode

PCB Counter Stop Mode

[Designate] Button:

When this button is selected and the produced PCBs reach the value set in "Count" text box,

the PCB intake is stopped and after all the PCBs in the machine are discharged, the machine

is automatically stopped.

[No Designate] Button

When this button is selected, the PCB counter stop mode is not used.

Count

The number of produced PCBs for each lane for stopping the machine using the PCB Counter

Stop Mode, is set in this group box.

The set count is displayed in the "Count" data box in the "AUTO. OPN" window.

[2] [Init Value] Button

When this button is pressed, the set value for the "PCB Counter Stop Mode" is returned to the initial

value.

Note

EUKYX

6-89199-2100

8. "PCB.CNT." Window

• PCB Counter Stop Procedure

(1) Display the "PCB.CNT." window.

(2) Set the "PCB Counter Stop Mode" to "Designate".

(3) Press the [Count] button to display the "Count" window and read the "Count" barcode in

the instruction sheet using the barcode reader attached to the machine. (The value read

with the barcode reader, will be displayed on the "Count" window).

F2F123

(4) Confirm the read value and when it is OK, press the [Set] button.

(5) Confirm that the read value has been entered in the "Count" data box.

When the value in the "Count" data box is re-set, press the [Count] button and change the set

value.

Procedure

Note