m220_383_02_process_manual工艺手册 - 第72页

OPERATION INSTRUCTIONS P ROCESS M ANU AL 5.6.2 TSC-2 1) select the desired tube from the pull-down menu or from t he ‘Overview’ screen. 2) select ‘Operations’ to acces s the operations screen. 3) Press ‘Abor t’ to abort …

OPERATION INSTRUCTIONS

ROCESS MANUAL

5.6 Abort a running process recipe

A manual ‘Abort‘ instruction may be required if the operator foresees a dangerous situation

or a continuous looped process recipe needs to be reset to Step 0 to allow selection of

another process recipe.

5.6.1

Touchscreen

1) return to the Main Menu by

pressing ‘ESC’ until the following

screen appears:

2) press ‘4’ to access ‘Tube Control’

3) press ‘3’ to access ‘Abort Process

Recipe’

4) press ‘Yes’ to confirm the

question ‘Are you sure you want

to abort?’

5) press ‘Yes’ again to activate the

abort command

5.6-1

OPERATION INSTRUCTIONS

ROCESS MANUAL

5.6.2

TSC-2

1) select the desired tube from the

pull-down menu or from the

‘Overview’ screen.

2) select ‘Operations’ to access the

operations screen.

3) Press ‘Abort’ to abort the

selected process recipe.

4) Press ‘Yes’ to confirm the

question ‘Sure to abort?’

5.6-2

OPERATION INSTRUCTIONS

ROCESS MANUAL

5.7 Edit ‘Variable Process Command’

‘Variable Process Command‘ can be used to quickly modify specific process settings. Only

those lines in the process recipe that have been assigned as ‘Variable Commands‘ will be

presented in a list. From this list the desired process setting may be modified.

‘Variable Process Command‘ can be set at all times until the recipe step is executed in which

the specific ‘Variable Command‘ is programmed.

5.7.1

Touchscreen

1) return to the Main Menu by

pressing ‘ESC’ until the following

screen appears:

2) press ‘4’ to access ‘Tube Control’

3) press ‘5’ to access ‘Variable

Commands’

4) edit the desired process setting

1) enter the

corresponding line

number

2) modify to the

desired setting

3) press ‘Return’ to

confirm the

modification

repeat step 4) until all desired

process settings have been

set

6) Press ‘Esc’ to store the new

commands. The message

‘Process recipe variable

5.7-1