00198622-04_IM_WES7_WIN10_EN-DE - 第13页
WES7 / Win10 - Inst allation Manual 09/2020 Edition 13 4.2 BIOS Update/Sett ings A BIOS update shal l only be performed if requested. No BIO S updates have to b e performed on the current computers at present. ► Perform …
WES7 / Win10 - Installation Manual 09/2020 Edition
12
4 Installation
4.1 Overview
Choose computer configuration
SIPLACE WES7 Configurator
SIPLACE Win10 Configurator
Install and calibrate Touchscreen
BIOS settings on the Station / Coplan /
BulkFeeder X computer
Perform BIOS settings
Back up the machine data
BIOS update on the Station / Coplan /
BulkFeeder X computer
Perform BIOS update
Install WES7/Win10
(DVD or USB stick
suitable for the
computer)
Restore the initial configuration
See section 4.2.
See section 4.2.
Installing the operating system, see section 4.3.
See section 4.3.3.
See chapter 5.
Figure 4-1: Installation
WES7 / Win10 - Installation Manual 09/2020 Edition
13
4.2 BIOS Update/Settings
A BIOS update shall only be performed if requested. No BIOS updates have to be performed on
the current computers at present.
► Perform the BIOS settings as follows.
The following steps have to be performed before installing the operating system:
► Press the F2 key to access BIOS after the computer has started.
► Press the F9 key (Setup Default) to set the default settings.
► Change the BIOS settings as described in the following section.
4.2.1 BIOS Settings for SIMATIC BoxPCs 627B / 827B
► Set the following values in BIOS:
Under Main / Hardware Options:
PCI-MPI/DP [ Disabled ]
Safecard Functions [ Disabled ]
Fan Control [ Enabled ]
Under Advanced / SATA/PATA Configuration:
SATA Controller Mode [ Compatible ]
Under Advanced:
Core Multi-processing [ Enabled ]
Under Boot the following boot priority sequence:
1: USB CDROM: 2: SATA0: xxxxxxxxxx 3: ......
Under Exit / Profile:
Profile: [User]
► Exit BIOS with Exit / Exit saving changes / Yes.
WES7 / Win10 - Installation Manual 09/2020 Edition
14
4.2.2 BIOS Settings for SIMATIC BoxPCs 627C / 827C
► Set the following values in BIOS:
Under Power:
Wake up on PME/LAN 2 [ Disabled ]
Under Boot:
USB-Boot [ Enabled ]
Under Boot / Legacy Boot Type Order the following boot priority sequence:
1: USB ODD
2: SATA0 HDD
3: ...
Under Advanced / CPU-configuration:
CMP-Support (= Core Multi Processing)
[ Auto ]
► Perform the following items under Exit successively:
► Confirm Save User Profile with [Yes].
► Confirm Load User Profile with [Yes].
► Exit BIOS with Exit / Exit saving changes / Yes.
4.2.3 BIOS Settings for SIMATIC BoxPC 627D / 827D
All required settings have been set by default (factory settings).
4.2.4 BIOS Settings for iBASE PCs
All required settings have been set by default (factory settings).
4.2.5 BIOS Settings for SIMATIC MicroBox 427D and SIMATIC MicroBox 427E
All required settings have been set by default (factory settings).