00198622-04_IM_WES7_WIN10_EN-DE - 第15页
WES7 / Win10 - Inst allation Manual 09/2020 Edition 15 4.3 Installing the Operating System NOTICE When starting the co mputer from DVD or U SB stick, it might be possi ble that o nly one monitor is active. ► If necessary…
WES7 / Win10 - Installation Manual 09/2020 Edition
14
4.2.2 BIOS Settings for SIMATIC BoxPCs 627C / 827C
► Set the following values in BIOS:
Under Power:
Wake up on PME/LAN 2 [ Disabled ]
Under Boot:
USB-Boot [ Enabled ]
Under Boot / Legacy Boot Type Order the following boot priority sequence:
1: USB ODD
2: SATA0 HDD
3: ...
Under Advanced / CPU-configuration:
CMP-Support (= Core Multi Processing)
[ Auto ]
► Perform the following items under Exit successively:
► Confirm Save User Profile with [Yes].
► Confirm Load User Profile with [Yes].
► Exit BIOS with Exit / Exit saving changes / Yes.
4.2.3 BIOS Settings for SIMATIC BoxPC 627D / 827D
All required settings have been set by default (factory settings).
4.2.4 BIOS Settings for iBASE PCs
All required settings have been set by default (factory settings).
4.2.5 BIOS Settings for SIMATIC MicroBox 427D and SIMATIC MicroBox 427E
All required settings have been set by default (factory settings).
WES7 / Win10 - Installation Manual 09/2020 Edition
15
4.3 Installing the Operating System
NOTICE
When starting the computer from DVD or USB stick, it might be possible that only one
monitor is active.
► If necessary, back up the machine data manually.
For Coplan Modules and BulkFeeder X:
► Follow the instructions in the respective Assembly Instruction for the 3D Coplanarity Module,
item nos.: [00195344-xx] (for X-series), [00196842-xx] (for SX1/SX2) and [00197395-xx] (for
X-series S) or the instructions in the Operating Manual for BulkFeeder X, item no. [00198045-
xx].
4.3.1 Installing from DVD (WES7)
NOTICE
Before you start working, ensure that the DVD drive is set as the first boot device in the
BIOS to allow the computer to be booted from DVD.
► Insert the "Win.Emb.Std.7" installation DVD suitable for the computer into the DVD drive.
► Switch on the computer to start it from the DVD or reboot the computer if it was already
switched on.
► Press any key when the message Press any key to boot from CD Rom is displayed.
► Follow the instructions of the Restore Installation procedure.
4.3.2 Installing from USB Stick (WES7, Win10)
► Insert the USB stick in a USB interface on the computer.
► Switch on the computer or reboot the computer if it was already switched on.
► Either adjust the boot sequence in the BIOS settings accordingly (key F2) or start the computer
from USB stick via the Boot menu (key Esc or key F12).
► Follow the instructions of the Restore Installation procedure.
Selection of Restore options:
If the system partition size is too small on the hard disk, it is only possible to delete and re-partition
the complete hard disk (message Complete hard disk recovery).
WES7 / Win10 - Installation Manual 09/2020 Edition
16
If the system partition is big enough, the Choose Restore Option message is displayed and
one of the following options may be selected:
1. Restore existing system partition only
The system partition will be restored only.
2. Restore complete system disk
The complete hard disk will be restored.
► Select an option and confirm your selection with OK (or cancel your selection with Cancel).
The operating system is installed.
When installing from a USB stick, the completion of the restore image installation is displayed in
the following manner, depending on the PC type and Windows version:
Figure 4-2: Final message in general
Figure 4-3: Final message under Win10 on iBASE computers
If the completing window is confirmed with OK, the reboot starts automatically.
NOTICE
Please observe:
When installing from DVD, no completing window is displayed and after successful
installation, the reboot starts immediately.