00198365-03_UM_JTF-ML2_TX12_V1-V2_EN - 第16页
2 Operational safety 2.1 Safety instructions 16 User Manual SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 Fig.6: Conveyor belt rollers Fig.7: Sliders Fig.8: Side tray clamp 2.1.5 Risk of crashing when us…
2 Operational safety
2.1 Safety instructions
User Manual SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 15
2.1.3.3 Safety of Plant and Equipment
► Never make changes, however minor, unless you are totally aware of the effect they will have
on the overall functioning of the module and system!
► The modules must always be set up, retooled and maintained by appropriately trained person-
nel.
► Do not make modifications to the safety equipment. In particular, NEVER deactivate circuit-
breakers or remove safety devices.
2.1.4 Danger of Crushing at the SIPLACE JTF-ML2
Fig.3: EMERGENCY STOP button
The SIPLACE JTF-ML2 (JEDEC tray feeder)
stops when the EMERGENCY STOP button
(1) is pressed.
DANGER
Danger of crushing
There is a risk of injuries by pinch points or a risk of crushing by reaching into the feeder or
from loose clothing which could get into the feeder during operation.
► Observe correct handling and the safety instructions.
► Do not reach into the feeder while it is running.
► Maintain an adequate safety distance.
Areas of the SIPLACE JTF-ML2 at which there is a danger of crushing
Fig.4: Do not reach into the JTF or into the machine
through the JTF
Fig.5: Moving magazine
2 Operational safety
2.1 Safety instructions
16 User Manual SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019
Fig.6: Conveyor belt rollers
Fig.7: Sliders
Fig.8: Side tray clamp
2.1.5 Risk of crashing when using thick JEDEC trays
DANGER
Risk of crashing when using thick JEDEC trays
►
Do not use thick JEDEC trays in combination with C&P20P2 or CPP_L.
Otherwise, the head will be damaged.
See also
2 3.2 "Overview – SIPLACE JTF-ML2" [}27]
2 Operational safety
2.1 Safety instructions
User Manual SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 17
2.1.6 Safety Instructions for Transporting the Module
Fig.9: Holding the tower
CAUTION!
Tower weight
The weight of the tower (26.3 kg) could
cause injuries if the module is not
handled correctly.
Always hold the tower with two hands.
Use the handles on the sides of the
tower.
Tower and conveyor must be
transported separately. Mishandling
will cause damage to the SIPLACE
JTF‑ML2.
.