00195963-03_MM SWS-EN - 第11页
11 Tools and Equi pment Have the f ollowing t ools and eq uipment to hand befor e you star t the mainten ance: Tools and E quipment Item number Waste bin Vacuum c leaner Collecti ng container Brush Set hexagon bal l - po…
Everything You Will Need for Maintenance
The following lists of materials contain all the tools, equipment and consumables that you will need
to maintain the placement machine.
CAUTION
Only carry out maintenance work, if you are specially trained or instructed for this work.
Always use ethyl alcohol for cleaning – do not use solvents.
Apply all lubricants sparingly and exactly where they are needed. Remove excess lubricants after
lubricating.
Containment of Service Box SWS (00519790-01)
The Servicebox for Siplace CA (SWS) 00388421-01 contains following parts
Tools and Equipment
Item number
Siplace Cleaning-tissue
00315253-03
Interflon Fin Grease (Aerosol)
03020782-01
O-Ring 5 X 2 NBR
03073457S01
Vacuum plate compl. DLM/R-lightbeige
03037984-03
Sealing unit
00387580S01
O-Ring 3 x 1 NBR 70 B
00201141-01
Sparepart set Vacuum pump
03079140-01
Micro fuse 6,3x32 / T 6,3A / Glas
03078846-01
Ejector Needle 0,7x17
00385643-01
FPC Flex Cable Jumper 5Pol Length=2,2 (Inch)
00385451-01
11
Tools and Equipment
Have the following tools and equipment to hand before you start the maintenance:
Tools and Equipment
Item number
Waste bin
Vacuum cleaner
Collecting container
Brush
Set hexagon ball-point angle screwdriver
e.g. 00376492-01
Set Hexagon socket head cap screw driver (0,7 - 2,0 mm)
00320265-01
Laboratory gloves (cotton)
00359087-02
Protective latex gloves
00372972-01
Service Box SWS (for Siplace CA)
00519790-01 or
00388421-01
Consumables and Wearparts
Have the following consumables to hand before you start the maintenance:
Consumables
Item number
Lint-free cloths
cleaning buds, lint-free
in Service Box SWS
00352931-02
SIPLACE cleaning tissue
00315253-02
Lens cloth / optical cloth
Ethyl alcohol
Compressed air
Oil dispenser with Structovis GHD
00367071-01
Multipette plus 4981 data sheet 613-3669 T22
00386154-01
Combitips Plus 0.2 ml blue T22
03070440-01
Lubcon Thermoplex ALN 1001/00 50 ml (blue) C10
03078556-01
Fin Grease spray grease (aerosol)
03020782-01
DIN A 3 paper
Have the following wear parts to hand before you start the maintenance:
Wear Parts
Item number
Vacuum plate compl. DLM/R-lightbeige
Part of Servicebox
03037984-03
Sealing unit
Part of Servicebox
[00387580-01]
O-Ring 5 X 2 NBR Wafersupport
Part of Servicebox
[03073457S01]
Vacuumpump Sound Absorber U-1/8 (Festo)
[03050536-01]
Sparepart set Vacuum pump
Part of Servicebox
[03079140-0]
Fuse SMD Flip-Chip F1 - 24V/3AT
[03078645-01]
Fuse SMD Wafertable F1 - 24V/2AT
[03078644-01]
Fuse SMD Wafertable F2 - 5V/0,5A-FF
[03078647-01]
Fuse SMD Waferlift 24V - 3AT
[03078645-01]
Fuse SMD Supply F1 - 24V - 3AT
[03078645-01]
Fuse SMD Supply F2 - 5V/1AT
[03078643-01]
Micro Fuse Waferheating 6,3AT (Glas)
[03078846-01]
Important Points to Note when Carrying out Maintenance Work
The given maintenance intervals for checking and exchanging the filter elements are valid for the
specified compressed air quality only (see the compressed air specifications in the User Manual
[00195941-xx]). If other qualities are used, the maintenance intervals should be shortened accord-
ingly.
CAUTION
It is strictly prohibited, to clean any modules within the SWS by means of compressed air.
Enter the completed maintenance work in the maintenance schedule. We recommend that you
carry out the jobs in the order given in the maintenance schedule.
Before Carrying out Maintenance Work
Unless stated differently for the individual tasks, proceed as follows:
Shut down the placement machine and the SWS properly and switch them off.
Secure the placement machine and the SWS against unauthorized reactivation.
Make the required modules of the SWS accessible (See ”Opening and Closing the Interior of
the SWS” on page - 14.).