00195963-03_MM SWS-EN - 第70页
Cleaning Z Gui des an d Z Spindl e NOTE The spind le for the Z s troke as well as the Z linear guides of th e magazine lift hav e got a lifet ime lubricati on, so that it is only necessar y to clean t hem. Interval: Mont…
69
Maintenance Work at the Magazine Lift
Vacuuming the Magazine Support Plate
Interval: Weekly
Equipment:
Vacuum cleaner, brush
Open the sliding door of the magazine lift.
Clean the magazine support plate with a vacuum cleaner or a brush from dust and dirt.
Close the sliding door.
Cleaning the Frame Sensor
The two frame sensors are located at the rear side of the magazine lift.
CAUTION
Never use a solvent for cleaning the sensors, to prevent the plastic surface from being damaged.
Interval: Monthly
Equipment:
optical cloth
Legend
[1] Crash sensor
[2] Slot sensor
Clean both frame sensors with an optical
cloth.
Cleaning Z Guides and Z Spindle
NOTE
The spindle for the Z stroke as well as the Z linear guides of the magazine lift have got a lifetime
lubrication, so that it is only necessary to clean them.
Interval: Monthly
Equipment:
SIPLACE cleaning tissue
Magazine lift - linear guides and spindle at the top Magazine lift - linear guides and spindle at the bottom
Legend
[1] Linear guide
[2] Spindle for Z stroke
Open the sliding door of the magazine lift.
Wipe the whole length of the spindle and the linear guides with a SIPLACE cleaning tissue.
Close the sliding door of the magazine lift.
1
2
1
71
Cleaning the Guide of the Sliding Door
Interval: 6 months
Equipment:
Ethyl alcohol, lint-free cloth
Legend
[1] Guide of the sliding door
Open the sliding door.
Clean the guide rails on both sides with a
cloth moistened with ethyl alcohol.
Close the sliding door.