Printer 710_810 v8 Preventive Maintenance - 第63页

PREVENTI VE MAINTENA NCE CLEANI NG, LU BRICAT ION AN D MAI NTENANC E DIAG RAMS Chapter Issue 6 Oct 06 Technical Reference Manual 33.63 5. The back of the carbon fi lter unit i s secured beneath a filter sec uring bracket…

100%1 / 70
PREVENTIVE MAINTENANCE
CLEANING, LUBRICATION AND MAINTENANCE DIAGRAMS
33.62 Technical Reference Manual Chapter Issue 6 Oct 06
VF35i Vacuum
Filtration Unit
To replace any of the filters in the Vacuum Filtration Unit, carry out the following:
1. Ensure the machine is switched OFF.
2. Remove the machine front panel.
3. Remove the air duct from the carbon filter unit using a screwdriver or box
spanner to release the securing clip.
4. Release the filter retaining clip to detach the filters from the base unit.
PREVENTIVE MAINTENANCE
CLEANING, LUBRICATION AND MAINTENANCE DIAGRAMS
Chapter Issue 6 Oct 06 Technical Reference Manual 33.63
5. The back of the carbon filter unit is secured beneath a filter securing bracket.
To remove the filter, lift the front and pull the filter out of the machine.
6. Turn the filter unit upside down.
7. To separate the pre-filter unit from the carbon filter unit, pull the pre-filter
upwards using the pre-filter frame.
PREVENTIVE MAINTENANCE
CLEANING, LUBRICATION AND MAINTENANCE DIAGRAMS
33.64 Technical Reference Manual Chapter Issue 6 Oct 06
8. Replace the carbon\pre-filter as required and refit the pre-filter into the
carbon filter unit.
9. Refit the carbon filter unit to the vacuum filtration unit.
NOTE
When refitting the carbon filter unit to the base unit, ensure that the rear of
the carbon filter unit is located beneath the filter securing bracket.
10. Secure the carbon filter unit using the filter retaining clip.
11. Refit and secure the air duct to the carbon filter unit.
12. Refit the panel removed in Step 2.
VF25 Vacuum
Filtration Unit
To replace any of the filters in the Vacuum Filtration Unit, carry out the following:
1. Ensure the machine is switched OFF.
2. Remove the machine front panel.