2DI

COPYRIGHT Copyright (c) 2000 DEK Printing Machines Limited. All Rights Reserved. Microsoft and MS-DOS are registered trademarks of Microsoft Inc. W indows and W indows NT are trademarks of Microsoft Inc. All other brand …

Microsoft and MS-DOS are registered trademarks of Microsoft Inc.

Windows and Windows NT are trademarks of Microsoft Inc.

All other brand and product names are trademarks or registered trademarks of their respective holders.

Trademark Acknowledgment

AutoFlex, FormFlex, Vortex and ProFlow are registered trademarks of DEK Printing Machines Limited.

2D INSPECTION CONTENTS

MODULE OVERVIEW ...........1

Introduction ...........1

Purpose ............1

Operation ............2

Screen Inspection ...........3

Board Inspection ...........4

Shapes ............5

Shape Recognition ..........6

Paste Volume Prediction .........7

Auto Learn ............8

Inspection Cycles ...........9

Histogram ............10

Lighting ............10

Inspection Setup ...........11

Adjustment During Print Cycle ........13

2Di SETUP .............14

Preparation ............14

Set Preferences ...........14

Load Product File...........14

Edit Data ............15

Edit Global ............18

Edit Limits ............19

AddLimits..........20

Edit Limits ..........21

Edit Site ............23

Lighting Setup ..........25

Learn Site ...........27

Inspect ............29

Auto Learn ............34

SETUP TIPS ............37

OPTIONS AFTER AN INSPECTION ALARM .......38

Accept ............38

Inspect More ...........38

Recovery Action ...........38

Paste Load ..........38

Clean Mode 1 and 2 .........38

Re-print Board ..........38

Adjust ............38

Inspect All ............39

Adjust Inspect ...........39

Issue 8 Sept 00 265GS/GSX/Lt/Horizon/Infinity

2D INSPECTION

CONTENTS