2DI - 第52页
48 265GS/GSX/Lt/Horizon/Infinity Issue 8 Sept 00 2D INSPECTION MENU PARAMETERS
Parameter Definition
Board Vertical This parameter sets the level of board vertical light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
Screen Oblique This parameter sets the level of screen oblique light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the green camera only.
Board Oblique This parameter sets the level of board oblique light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the green camera only.
Screen Inner LR This parameter sets the level of screen inner left/right light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Screen Inner FR This parameter sets the level of screen inner front/rear light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Screen Outer LR This parameter sets the level of screen outer left/right light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Screen Outer FR This parameter sets the level of screen outer front/rear light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Board Inner LR This parameter sets the level of board inner left/right light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Board Inner FR This parameter sets the level of board inner front/rear light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
46 265GS/GSX/Lt/Horizon/Infinity Issue 8 Sept 00
2D INSPECTION
MENU PARAMETERS
Parameter Definition
Board Outer LR This parameter sets the level of board outer left/right light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Board Outer FR This parameter sets the level of board outer front/rear light.
Minimum - 0
Maximum - 15
Increments - 1
Default - 8
This parameter is for the silver camera only.
Limit Set Options This parameter enables the output of these inspections.
Blockage
Smear
Paste
Alignment
Bridging
Volume
Issue 8 Sept 00 265GS/GSX/Lt/Horizon/Infinity 47
2D INSPECTION
MENU PARAMETERS
48 265GS/GSX/Lt/Horizon/Infinity Issue 8 Sept 00
2D INSPECTION
MENU PARAMETERS