KE2040Instruction Manual Ver2.01,REV04.2003.6.25 - 第51页
1 − 34 1.2.4 Head-related unit: parts identification The head unit consist s of t he laser align sensor used to detect placement and ang le off sets of the com ponent, and t he Z slide shaft which can be moved up and dow…
1 − 33
FF05/08 Parts identification (2/2)
12
11
16
17
4
5
15
13
7
2
1
10
Figure 1.2.3.6 Detailed illustration of the right side
①
X axis reference pin A
⑧
Stopper
⑮
Guide cover
②
X axis reference pin B
⑨
Free link
⑯
Unreeling plate
③
Sprocket wheel
⑩
Tape holder
⑰
Unreeling guide roller
④
Upper cover
⑪
Cover tape fixing plate
⑱
Reel support
⑤
Upper cover hook
⑫
Lock release lever
⑲
Tape groove
⑥
Shutter
⑬
Lock holder
⑦
Knock lever
⑭
Tape guide
12
11
10
16
17
5
6
4
Figure 1.2.3.7 Detailed illustration of the top side
1 − 34
1.2.4 Head-related unit: parts identification
The head unit consists of the laser align sensor used to detect placement and angle
offsets of the component, and the Z slide shaft which can be moved up and down, or
be turned.
The Z slide shaft and the Z slide bracket of the Z axis are driven with rotations of the
ball screw.
The θ-axis encoder located on the upper section of the θ-axis motor detects the angle
of a component.
The machine is equipped with two units of FMLA head (L) and FMLA head (R) as
standard parts.
L Head-related unit (FMLA head) R Head-related unit (FMLA head)
Figure 1.2.4.1 Head-related unit
①
Nozzle outer
⑦
θ-axis encoder
②
Laser alignment sensor
⑧
Ball screw
③
Z-axis motor
⑨
Linear way
④
Z-axis encoder
⑩
Head-up spring
⑤
Z slide shaft
⑪
Head top bracket
⑥
θ-axis motor
⑫
Z slide bracket
⑦
⑥
⑪
⑫
⑨
②
①
⑤
⑧
④
③
⑩
1 − 35
1.2.5 ATC unit (Automatic tool changer): parts identification
The slide plate w is opened and closed by the air cylinder
④
to store or
attach/detach the nozzle
⑨
. The ATC OPEN sensor
⑥
and the ATC CLOSE
sensor
⑦
detect whether the slide plate
②
is opened or closed, and the speed
controller
⑤
adjusts the speed for opening or closing the slide plate.
1
5
6
8
7
9
10
11
12
4
3
2
13
17
18
A
B
C
16
15
14
Figure 1.2.5
①
ATC bracket
⑥
ATC OPEN sensor
②
Slide plate
⑦
ATC CLOSE sensor
③
Nozzle outer support
⑧
ATC numbers (1 to 18, A to C)
④
Air cylinder
⑨
Nozzle
⑤
Speed controller
①
⑦
③
④
②
⑧
⑤
⑥
⑨