KE2040Instruction Manual Ver2.01,REV04.2003.6.25 - 第680页
8 − 36 (3) Product ion operation T able 8.2.2.10.3 Placement when set to “Unused” No. Unit Production operation 1 S tops by detected feeder float The X Y speed becomes slow er when the sensor detect s feeder floating whi…
8 − 35
8.2.2.10.3 Function Device enable
A screen appears as shown in Figure 8.2.2.10.3 “Function Device enable setting”
dialog box appears when the [Function Device enable] tab is selected
When "MTS" is selected on the "MTC/MTS Device enable" dialog box, the menu
items are changed to "Bank mark Recognition [Rear (MTS)]".
Figure 8.2.2.10.3 Function Device enable setting dialog box
(1) Setting items
No. Item Description
1 Function Device enable Function to be used/not used
If the production program requires the functions above to place components
on a board successfully, and you specify them as “unused”, see Table
8.2.2.10.3 which shows whether components are placed actually.
Limitations put on operations of the machine if you check any of check boxes
of the “Optimization function” group are described in Table 8.2.2.10.4.
(2) Setting the unit
− Specify the device unit to be used with the check box.
− Any unit without option setting being made as the MS parameter cannot be
checked.
Zeroing is necessary again when changing the head status from as not to be
used.
◇ Back Master-Bank [Non-stop]
− Specifies the position of the master bank during Non-stop operation.
− You can specify this setting regardless of the PWB transport reference
side.
− The setting of the check box “Alternate” on the “Function enable” tab
invoked from the Operation option dialog box is preferred.
8 − 36
(3) Production operation
Table 8.2.2.10.3 Placement when set to “Unused”
No. Unit Production operation
1 Stops by detected
feeder float
The XY speed becomes slower when the sensor detects feeder floating while
the XY axe are moving.
When the sensor detects feeder floating before the XY axes moves, the
machine asks the operator whether to retry the sensor detection operation.
When the operator selects “Retry”, the sensor reconfirms feeder floating.
When he or she selects “Cancel”, the production is terminated.
2 Bank mark Recognition
(front, rear)
The function is disabled but placement of components is carried out.
3 SOT Inspect Stage You cannot specify the SOT direction check on the tracking menu.
4 Back Master-Bank
[Non-stop]
Places the master bank on the front (“Front” means the front side of the main
unit.).
5 VCS recognition retry The system does not retry to recognize a lead component with the VCS even
though the recognition error occurs due to the difference of gloss that varies
depending on the lot.
Table 8.2.2.10.4 Placement operation to be performed if you check any of the
check boxes of the “Optimization function” group
No. Unit Production operation
1 Disable feeder
optimization
The “Pick Data” option displayed on the dialog box that appears when you
execute the [Optimization] command on the “Optimization” menu of the
Program Editor utility is fixed to “Auto assign all data”. You cannot select
any other option.
2 Disable nozzle
optimization
The “Nozzle” option displayed on the dialog box that appears when you
execute the [Optimization] command on the “Optimization” menu of the
Program Editing utility is fixed to “Use permanent nozzle setup from MSL
Setup”. You cannot select any other option.
8 − 37
8.2.2.10.4 VCS Device enable
When you select the [VCS Device enable] tab, the “VCS Device setting” dialog box
appears on the screen as shown in Figure 8.2.2.10.4.
Figure 8.2.2.10.4 VCS Device enable setting dialog box
(Screen example when a KE-2020 is used)
(1) Setting items
No. Item Description
1 VCS
Enables or disables an VCS unit.
If a VCS unit malfunctions, disable it on this dialog box. It allows the
machine to pick up/place components on a board without modifying
the production program being used.
If the production program requires the unit above to complete component
placement, Table 8.2.2.10.4 shows whether production is to be performed
actually or not.
(2) Setting the position
- Specify a VCS unit to be used with checking the corresponding check box.
- You cannot select a VCS unit which was not set as an option with the MS
parameter (it is dimmed on the dialog box).
(3) Production operation
Table 8.2.2.10.4 Placement when set to "Unused"
No. Unit Production operation
1 CAMERA A component that is to be recognized with a VCS is skipped.
2 LIGHT A component that is to be recognized with a VCS is skipped.