KE2040Instruction Manual Ver2.01,REV04.2003.6.25 - 第891页

14 − 7 14.2.4 Air f ilter (MNLA Head/FMLA Head) 14.2.4.1 M NLA Head 1) Loosen the scr ew ② fixing t he Z slide shaft ① to pull out the nozzle outer shaf t ③ . 2) Check to see if ther e is any contamination of the f ilter…

14 − 6

(2) Piping diagram (Head)

Blow-Sw

ø8

(3) Piping diagram (Overall changer table, Common to all four tables)

ø6

Ejector

Filter

Pressure sensor

Nozzle

Roller lever

Selector

Pilot check valve

14 − 7

14.2.4 Air filter (MNLA Head/FMLA Head)

14.2.4.1 MNLA Head

1) Loosen the screw ② fixing the Z slide shaft ① to pull out the nozzle outer shaft

③.

2) Check to see if there is any contamination of the filter ④.

3) If any, remove the filter ④ from the nozzle outer shaft, the replace it with a new

one.

4) Push the nozzle outer shaft ③ into the Z slide shaft ①, then fix it with the screw

②.

Filter ④: Part number E3052729000

WARNING

To prevent the body from injury which can be caused by accidental

activation of the machine, turn off the power of the machine before

following the operation above.

④

③

②

①

14 − 8

14.2.4.2 FMLA Head