PWL5170_Encore-XT-Manual-Powder-Spray-System - 第2页
Nordson Industrial Coating Systems 100 Nordson Drive Amherst, OH, 44001 USA Phone: +1.440.985.4000 www .nor dson.com/ics /NordsonICS /company/nordson-i c s Find your local Nordson office: www .nor dson.com/icslocations A…
Plug and play design features lightweight gun
with On-Gun* controls and display, a highly
efficient pump, and simple yet flexible controls
with digital closed-loop flow control.
Smart controls and digital closed-loop
flow control
Encore Controls are easy to use and provide greater flexibility –
all with closed loop digital flow control. Nordson’s Select Charge
®
Controls provide pre-programmed KV and micro-amp controls for
recoating, metallics, and cavities.
•
Select Charge
®
Controls – for pre-programmed electrostatic
settings for recoating, metallics, or cavities.
•
Classic Electrostatic Control – lets you select between
either KV or AFC mode.
•
Custom Electrostatic Control – lets you adjust both
KV and AFC mode independently.
•
Classic Flow Control –
for independent control
of both flow air and
atomizing air.
•
Smart Flow Control
– for simplified control
of both flow air and
atomizing air.
•
Digital Closed-Loop Flow Control – automatically
compensates for variations in incoming air pressure by
providing consistent flow air to the pump – thus eliminating
variations in powder film build.
•
Preset Control – for selection of up to 20 presets including
any combination of flow and electrostatic controls for precision
parameter control of any powder for any part.
•
Flexible Unit of Measurement – for setting flow air in
either SCFM or M³/HR.
•
Function Codes – for even more precision control
of various gun, pump, and system parameters such as
electrostatics, flow air, unit display, and many others.
•
Self Diagnostics “help codes” – controller identifies specific
parameters making troubleshooting easy and effortless.
PERFORMANCE DEMAND
Bright Blue LED Display –
provides the ability to see
flowrate or preset changes
without looking at the controller
and losing valuable spray time.
On-Gun* controls –
allow quick mode changes
on the fly for both presets
and flowrate
Auxiliary trigger –
for increasing
or decreasing
powder flow on
the fly as well as selecting
any one of a maximum
20 presets.
On-Gun* purge –
for complete cleaning of
the gun’s powder path.
Light weight –
for ease of use
and less fatigue.
Quick turn nozzle nut –
for quick nozzle changes
on the fly with only 1/4
of a turn.
*patent pending
Encore
®
XT
Manual powder spray system
Nordson Industrial Coating Systems
100 Nordson Drive
Amherst, OH, 44001
USA
Phone: +1.440.985.4000
www.nordson.com/ics
/NordsonICS
/company/nordson-ic
s
Find your local Nordson office:
www.nordson.com/icslocations
ATEX
Parts storage –
extra storage area
for optional nozzles.
Hose hanger –
for conveniently stowing
hoses and cable during
transport
Pump arm –
pick-up tube stays suspended when
changing boxes, stows easily when
not in use.
System specifications
Mobile powder spray
system:
Height/Width/Depth/Weight
108.2 cm (42.6 in.) 53.65 cm (21.1 in.)
82.59 cm (32.5 in.) 56.7 kg (125 lbs)*
Manual gun:
Height/ Length/
Reach/Weight
25.4 cm (10.00 in.) 33.8 cm (13.30 in.)
20.5 cm (8.07 in.) 475 gm (16.75 oz.)
Cable lengths 6 meters (20 ft.) gun cable
6 meters (20 ft.) cable extension
Operator interface:
Height/Width/Depth/Weight
19.7 cm (7.79 in.) 21.1 cm (8.34 in.)
8.9 cm (3.54 in.) 2.09 kg (4.6 lbs)
Power unit:
Height/Width/Depth/Weight
16.6 cm (6.54 in.) 28.8 cm (11.34 in.)
21.0 cm (8.27 in.) 8.16 kg (18 lbs.)
Input voltage 85-250 VAC,
1 Phase, 50-60 Hz
Output voltage 0-18 VAC
Input air pressure
(Min – Max)
6.0 – 7.6 Bar (87-110 PSI)
Typical air consumption Pump and Fluidizing 60 L/M (2.1
SCFM)
Air filtration 5 Micron filter included
Supply air must be clean and dry
*VBF system without powder
P/N Description
1600827 Encore XT Mobile Powder
Spray System with 115V VBF
1600828 Encore XT Mobile Powder
Spray System with 220V VBF
1600829 Encore XT Mobile Powder
Spray System with 50 lb Hopper
1600830 Encore XT Mobile Powder
Spray System with 25 lb Hopper
1600831 Encore XT Rail Mount Powder
Spray System with 230V VBF
1600821 Encore XT Rail Mount Powder
Spray System with 115V VBF
1600832 Encore XT Wall Mount Powder
Spray System with 230V VBF
1600822 Encore XT Wall Mount Powder
Spray System with 115V VBF
Parts tray –
convenient place for parts
when performing routine
cleaning and inspection.
Compact pump design
The highly efficient Encore pump provides more powder with less
compressed air. This means more powder at the gun with less
velocity for higher first pass transfer efficiency and more powder
on the part.
•
Higher performance and savings.
• Lower operating costs.
• More powder on the part,
on the first pass.
•
Less wear.
• Quick turn throat holder nut – for quick
and easy inspection of pump throat.
Flexibility and portability in plug
and play design
The Encore XT Mobile Powder Spray System provides ease
of mobility around the plant. It is collapsible for compact storage
or transport. The Encore system ships pre-assembled so that
any additional connections such as air and power are minimal.
The Encore XT Mobile Powder Spray System is virtually plug-and-
play making it a snap to set-up and spray right away –
for performance on demand.
© 2022 Nordson Corporation l All Rights Reserved l PWL-18-5170 l Revised 4/22