00193786-02 - 第149页

S I P L A C E G EM S W V e r s i on G EM 505 . 03 SP 1 H O S T I n t e r f a c e M anua l ©S i e m en s A G, a ll r i gh t s r e s e r v ed page 149 o f 241 5 . 2 . 9 H o st R e qu ests R e po r t b y C E I D S t ep SE C…

SIPLACE GEM SW Version GEM 505.03 SP1 HOST Interface Manual

5.2.5 Host Terminates Trace

Assumption: The Host started a Trace report as in the above scenario.

Step SECS Message Description

1. H -> E S2F23 W The Host initiates a trace, with the same trace

ID as the currently running trace, and with {XE

„TOTSMP“}TOTSMP (number of samples) set

to „0“.

2. H <- E S2F24 The Equipment acknowledges the trace

request. If the data in S2F23 is valid, the

Equipment terminates the trace.

3. If the Equipment has saved trace data that has

not yet been sent to the Host, it discards the

saved data.

5.2.6 Host Requests Status

Step SECS Message Description

1. H -> E S1F3 W Discrete Variable Request. The Host requests

the VIDs of interest.

2. H <- E S1F4 The Equipment sends the Variable values.

5.2.7 Host Defines Limits{XE "Limits Monitoring"}

Step SECS Message Description

1. H -> E S2F45 W Host defines new variable limits attributes.

2. H <- E S2F46 Equipment accepts new limits definitions, and

responds with {XE „VLAACK“}VLAACK =

0x00.

5.2.8 Host Queries Defined Limits{XE "Limits Monitoring"}

Step

SECS Message Description

H -> E S2F47 W Host requests listing of defined limits. This

request may be for limits of individual

variables listed in this message, or if this

message is an empty list, all limits will be

replied.

H <- E S2F48

{XE „VLAACK“}Equipment sends limits values

as required.

SIPLACE GEM SW Version GEM 505.03 SP1 HOST Interface Manual

5.2.9 Host Requests Report by CEID

Step SECS Message Description

1. H -> E S6F15 W Request Event Report. The Host requests a

report for the specified {XE „CEID“}CEID. In

this way, the host requests the Equipment to

„pretend that the specified CEID has occurred.

2. H <- E S6F16 The Equipment sends reports linked to that

CEID.

5.2.10 Host Requests Annotated Report by CEID

Step SECS Message Description

1. H -> E S6F17 W Request Annotated Event Report. The Host

requests a report for the specified {XE

„CEID“}CEID. In this way, the host requests

the Equipment to „pretend“ that the specified

CEID has occurred.

2. H <- E S6F18 The Equipment sends annotated reports linked

to that CEID.

5.2.11 Host Requests Report by RPTID

Step

SECS Message Description

H -> E S6F19 W Request Report. The Host requests a report

for the specified {XE „RPTID“}RPTID.

H <- E S6F20 The Equipment sends the report.

5.2.12 Host Requests Annotated Report by RPTID

Step SECS Message Description

1. H -> E S6F21 W Request Annotated Report. The Host requests

an annotated report for the specified {XE

„RPTID“}RPTID.

2. H <- E S6F22 The Equipment sends the annotated report.

5.2.13 Are You There

Step SECS Message Description

1. H -> E S1F1 W Are You There. The Host sends this simple

message.

2. H <- E S1F2

The Equipment reports its {XE „MDLN“}MDLN

and {XE „SOFTREV“}SOFTREV.

SIPLACE GEM SW Version GEM 505.03 SP1 HOST Interface Manual

5.2.14 Host Reads Equipment

Step SECS Message Description

1. H -> E S2F13 W Host requests the values of one or more

Equipment Constants.

2. H <- E S2F14 The Equipment responds with the values of the

requested Equipment Constants.

5.2.15 Host Sets Equipment Constants

Step SECS Message Description

1. H -> E S2F15 W Host sends new values for one or more

Equipment Constants.

2. H <- E S2F16 If all new values are valid, the Equipment saves

the new values and sends this message with an

acknowledge code of „0“. If one or more new

values are not valid, no Equipment Constants

are changed and the acknowledge code in this

message is non-zero.